Search results

That's horrible! I hope you can fix it. I just got mine up and running, booting from a bluescsi after reflowing solder.

Has anyone done the diode mod for external scsi power and can show me how to hook it up, and has anyone done the zener diode mod shown here:Zener. And can show me how to do it?

I'll try to send a video later.

I might have a surprise!!!

Can't wait to see it finished! It looked bad at first but with it cleaned it looks like it might actually be repairable! Have fun!

Thanks!

I found out that the DS3691V chip has a couple pins that hove become disconnected. Is it fixable because the pins are almost impossible to see the break, and would i be able to reflow the solder with a soldering iron? Also if it needs replacing what would I replace it with because I cant find...

Just a question, I am going over every single component on the board and have found 2 resistors and 1 transistor that are bad, I was wondering if any of the ram chips are actually bad or if they go bad. Because I don't want to throw the parts cannon at the mother board. Thanks!

This is technically the first mac in my family since like, the 1990's. Dad really hates them and so all ive used has been windows and never anything this old. My uncle had a powerbook. I think it was the one with the emulation layer so it could have compatibility with older mac stuff and he...

Don't worry about the voltage being 7.46 it's actually on the dot 7.5v. This is the video with the bluescsi installed. The amps are also on point. Also, all of the background noise is just mama making lunch. Mmmmm! :)

I also fixed the Bluescsi problem, I know I am doing the bluescsi correctly. I read on github someone had this problem and it was a broken trace and I was able to get a log file from the pico. But when everything was initialized it just said bus:busy and bus:free.

By the external power bridger I mean the bridge for the external power for the bluescsi. Unfortunantly, I don't have any floppy boot disks... I have taken a whole lot out of the equation. I took the bluescsi off. I took the floppy drive off and the speaker, although I know it does chime. I...

Thanks for the help in advance.

Hey everyone! I was able to get some sad mac codes by I think pressing the interrupt button, (It could have been the reset button) Could you tell me what they are? I think the one with the flag code 0300 major code 1303 and minor code 0007ffba means the ram is broken, but I am not curtain. Does...

Here is my latest log.txt remove the .zips and those are my files i am using. I found that the latest bluescsi pico update doesn't log or flash lights so I downgraded, The .ini is my homemade ini trying to get the portable to boot.

Alright! If you have a portable you'll want to replace them one of them was fine the other had the tell tale electrolytic burning sound. Caps And Values - 16v 10uF Radial 4mmx8mm and 50v 1uF Radial 4mmx6mm There's your values @3lectr1cPPC I'm glad I was able to get the portable working, And I...

Can someone tell me what's wrong? I insert my Sd card that has the ini file and hda file into the bluescsi and I plug the bluescsi into the portable but the power light only turns on when the external power bridger is in place and the act light never lights up. Also there is no log file on the...

@3lectr1cPPC You might want to put down on your website that their are some caps on the ball mouse as well

It works, 4 bodge wires (one on the hybrid pins and 3 on the caps), a couple of trace soldering and viola! It fired right up with a new hybrid module and caps with a new usb-c power supply I made and a battery eliminator... It showed that there was no hard drive connected with only like 6 pixels...

Thanks! A lot of pads lifted :( Now I have to trace traces... Fun!