Search results

going liPo is probably the best option for power density vs physical size. not to mention that a LiPo can handle much higher initial current draw. modifying a existing power banks output voltage probably isn't the way to go, off the shelf power banks generally only follow specific voltages...

ive done a few quick tests using the latest dev branch. the expat option in compile slowed down the boot up to a crawl where it just wasn't working so I didn't pursue that. I just reformatted using FAT32 and from what I could tell my ftp transfers are the same, disk speeds have gone up to around...

@cheesestraws thanks, yes I know I haven't posted in awhile, lifes been a bit crazy over the last year or so with time commitments. ive still been coming here occasionally to see what's new but its only recently where I actually have free time to mess around with my vintage machines. so even if...

it appears to be 5 slow blinks then I think 13 fast blinks then it repeats. I totally understand the being distracted with life, being at university and then covid happening has kept me away from my Macintosh hacking for quite some time. however im glad to hear you still have plans to continue...

Also I tried the latest firmware in the dev branch as I was going to try to the cdrom iso stuff but I had no luck, I set the correct config settings for the 128 variant of the atmega and I get some flashing leds but nothing else. I haven’t tried the boot loader yest just tried PDI programming...

@saybur that's absolutely fine, my intention was always to offer the files free to anyone who wants to print them also @cheesestraws I love the backplate, im working on a dual PDS adaptor for my SE/30 atm so I'll make sure to add a few of these back plates to my next order

hi saybur, I have been absent for quite awhile due to a busy workload with school, just wanted to say that I think its great you're still working on this and have a bootloader work, also I noticed a few post later that you have some initial CD-ROM support working. I have a couple weeks free from...

ive recently dug out my old color classic and awhile ago it was working, the logic board has been recapped about 2 years ago however upon turning it on now I get the startup chime and it appears to boot/read from floppy disk. however the display is completely dead. I hard replaced 90% of the...

hey saybur, been pretty busy with university lately, so haven't posted in a little while, just wanted to see were things are at and what I can do to help with testing etc..

just finished up some testing with the latest firmware using daynaport emulation: FTP maxes out around 93KB/s now, so that's a couple KB/s faster then last firmware appleshare no longer hangs the system doing a transfer from my main SE/30 with PDs network card over to my scuznet se/30 test rig...

I believe a bit is set in the pram to determine if OT should be enabled rather classic networking during the boot

after running the appleshare transfer I left the room and came back a bit later and it seems to have frozen my se/30 are 5mb of transfer interestingly though if I connect to an appleshare on my Main SE/30 then my testing se/30 (hopefully that makes sense) with the daynaport it starts off pretty...

I can confirm this change has fixed my ftp freezing the system, in fact with since my last round of testing I have seen a slight increase in ftp transfer speeds, I now get around 91KB/s, and it also ramps up much faster too. as for appleshare, transferring my OS X server 1.4.11 I still get very...

hi guys, I haven't had much free time the last week to get on the forums here and check out the current status of the scuznet, I should have some free time this weekend though to do some testing though. as for the IDC50 pin version of the hardware, I did make some a little while ago with the...

well my main server is running macOS Big Sur, and ive tried a few ftp server over the course of testing the scuznet but for at the last few months ive been using a commercial program called Rumpus, its not free but its obtainable. until I installed rumpus I was getting poor ftp transfer results...

I can report that has fixed up my sluggish hdd issue, mode=forcefast now runs well. I haven't done any other testing yet. I may get time tonight to test out some things but if not I'll have time tomorrow to check things out. I did do a quick AppleTalk transfer test with the Dayna emulation and I...

so ive tried out the new firmware with the nuvo emulation enabled but I still get the freeze in fetch with a movable mouse pointer and reseting the Mac required a power cycle on the scuznet fo hit to see the hdd to boot from. also the hard drive emulation is very sluggish, I have a 2gb hdd.img...

thanks for the kind words, I'll test out the new firmware, just to clarify though, "mode=normal" replaces 'mode=fast' and checks if the hdd image file is contiguous and if so switched to raw access? im assuming that 'mode=fast' and 'mode=forcefast' are no longer valid arguments in scuznet.ini?

no worries, let me know if you find anything and/or have any other tests you think are worth doing. i make a lot of pcb's and deal with surface mount soldering almost daily as well as a lot of restoration/repair work so i've been very stumped as to the cause and really just want to figure out...

I had one working with ftp originally but after further testing I discovered the issues I now have. at the time I was only transferring files around 1-4mb in size. only tried on a couple se/30's ill have to read back over my notes and forum posts to see if I tried it with the iici logic board I...