Search results

the Broadcom chip is down left but the pll location seems different? there are two different 1,33Ghz ibook G4, 12" and 14", maybe theres a softmod overclock possibility?

oh, mine didnt look bad either..maybe you can see some green corrosion that wicked through the cable/ connector..

old story, exactly over this whole area ( under the speaker panel) sits the green Varta PRAM battery of death, when it once leaked and electrolyte dripped onto the components beneath it, it is likely damaged/dead ( 47uF cap area)..I had two machines with little corrosion there, also did pay for...

interesting, I thought that you couldn't use a regular PCMCIA card in an AP socket due to pin incompatibility..

thanks..yes, the switchable 30 pin Adapter was confusing me a bit, what it was switching actually..additionally also depends on what devices you actuallly are using, desktop Mac/powerbook/external devices with different termination properties. I put in the active terminator onto the seconds scsi...

ok, I connected it with thw 29pin adapter and now the jaz appears on the desktop, copying works, quite fast actually

ok, now I got my adapter fpr Centronics-to-DB25 that fits to the Apple SCSI dock adapter. I have two variants, one with the 29 pins without Dock switch I used with my BluesScsi, and the one with the switch and 30 pins. I dont want to try my SCSI chip in the powerbook, I think I must use the 30...

of course..JAZ..my bad so it looks like that, like for the old AKAI devices? ( has a female db25 end though) or that one

found an external Iomega scsi zip drive, 1GB version, with power adapter and 6 1GB cartridges..nice but the cable is not the original and also not fitting to the Apple scsi Sub 25 Adapter. There also was an active terminator included. so to my knowledge I now need another cable, a...

when the charger is bad you can try to open it and look for bad caps..I havent dont that before for a 1400/3400 because mine were/are all still working. On ebay UK there are some modern replacements..

This is a tasty burger. Big Kahuna.

I wonder with that replacement of the rubber, does the thickness of the tape actually make a noticable difference in the behaviour of the parking position of the reader head? I could imagine that a too thick tape could prevent the head of making a perfect angle?

I had similar probs with my first 3400c, it's in-built Ethernet just wasnt working at all and didint even show up in the system profiler. Then I bought a second 3400c and everything just worked, the motherboard of the first one had some battery corrosion on it, so some traces or ICs had been...

have you tried the external USB CD drive with another Mac or Pc, does it squeak there,too?

and does the cd drive work?

yeah, that Macintosh off-white.. maybe you could give this simple primer spray a try, turned out quite ok with my 190c..

this one? https://www.thingiverse.com/thing:5662913

like here? do you know a software for G3 overclocking?

maybe they planned and produced a different location for the PRAM battery mid-production and then abondoned that idea. the most telling detail would be indeed where the cable of the second one went to.

necrobump..:cool: I'm interested to know what software there was for a little G3 overclocking.. found some old postings about Pismos or iMac G3's but not specific software . Maybe something from PowerLogic? and iCook was for newer ones and CPU Speed Adjustment Utility for iBook G3 (750FX)