Search results

So I was playing with this again using @jeremywork's image as a starting point. I've discovered something odd: If I copy the working system folder from jeremy's image to a "new" blank drive image it works, but if I copy the system folder from jeremy's image to a drive image that previously had...

And the URL of their site, nice find, https://web.archive.org/web/19980128161121/http://www.2ndwave.com/products/xpansion.html

Looks like the company also made a PCI to Nubus bridge, and there was a requirement for 32-bit clean applications. The closest thing I found to a technical note so far is: 7.2.1.4 PAL DEVICE. A 16L8 PAL is used to generate chip select signals to the DDLC and '374 address expansion register. The...

Good to know, I'll need to add a note to my site. Most of these modern options have Mac Plus specific settings

Ah, thanks. I can work with that, it would be similar to how I had to do a RAW write to an SD for SCSI2SD, or the partition setup option for the MacSD

Try https://www.savagetaylor.com/wp-content/uploads/68k_Macintosh/Bootdisks/320_32MB_volume.zip. I initialized it on my Plus, and was able to boot using my FloppyEMU, what I don't know is if that added the MBR

Ah, if I remember correctly I initialized them on my Plus, I thought that would add the MBR. Will check

The System 3.2 and 4.1 images I created for the FloppyEMU should work without modification I just got a Mac 512k to experiment with

So no luck on the document so far, but Alan Oppenheimer did respond "I have lots of other documents, and if I ever retire, maybe I'll organize them (I gave a bunch to Stanford many years ago too). Right now I'm way too busy (big intro next month; see artauthority.museum). It would be fun to have...

Interesting, I wonder if we could make a modern version? More info https://archive.org/details/upgradeyourmacin0000bran/page/243/mode/1up?q="second+wave" https://archive.org/details/mac-week-v-3-n-8/page/n14/mode/1up?q=%22second+wave%22+%22expansion%22+%22chassis%22...

Ditto, I do most of my setup using an emulator like Basilisk II and then just copy everything to my 68k macs, either over the network, or by editing the contents of a single volume drive image on an SD card that I then use with my ZuluSCSI, BlueSCSI or MacSD adapter.

I have guides on my site on how to update to the full version, typically I use Basilisk II to do the update using Apple’s Legacy Software Recovery CD from the Internet Archive as the source of the update files. Because you have the PiSCSI, you may be able to put the Legacy CD image directly on...

This is Steve from SavageTaylor.com Did you update my image to the full version of 7.5.5? I have an actual Asanté device that I use and it needed the full version of the system installed to work properly. I have a guide for the Plus and 6.0.8 on my site. I hope to experiment with the piSCSI...

The newlife adapters needed the 128k rom upgrade in order to work

He responded! He's looking to see if he has a copy.

Well, as a long shot I just sent Alan Oppenheimer a message on LinkedIn, he presented at WWDC 1990 about Apple Talk Phase 2 and referenced the document you are looking for. He was part of the original Macintosh networking team.

I'll keep an eye out while I finish going through the Apple CDs I'm writing about on my site. I assume you've already looked at the different technical and knowledge base articles from the late 80s and early 90s about Phase 2. Eg...

Is there a copy on one of Apple's early 90s CD? https://www.savagetaylor.com/2024/02/18/apples-inside-macintosh-1984-to-1996/#spinside_mac_1989_to_1993

What SD card did you use? And did you format it before you copied on the image file?

Is the Yamaha the external drive you have attached? I thought there was an issue that Apple computers would only boot from Apple branded CD-ROM drives? Have you tried @Phipli 's 7.6.1 image? https://68kmla.org/bb/index.php?threads/booting-a-mac-with-a-3rd-party-cd-rom-drive.46540/