Search results

Not sure if this will help. https://www.savagetaylor.com/2019/12/11/connecting-your-68k-macintosh-to-a-real-or-emulated-mt-32/ Install the Apple Midi Manager software. You’ll need to copy two files to the root of your OS folder: the Apple MIDI Driver and MIDI Manage. The instructions say to...

I never had any luck with the quick on and off, I only get video with the pram battery installed

I found the same as cc_333, if I only planned to used the Iomega zip drive as my boot drive, and therefore not change disks while the system is on, the patched Apple HD SC setup worked fine. The only benefit I found of using the official Iomega driver was when I wanted the Iomega icon, and I...

I assume you mean the external SCSI connector of you Plus? It might work, you might need to check that the drive is terminated properly, either jumpers or resistor packs

This may be possible, see the mention of using the appletalk protocol on page 65 for windows for workgroups: https://archive.org/details/apple-dos-compatibility-software-update-user-manual/page/64/mode/1up?q=Appletalk And https://savagetaylor.com/TIL/TIL18748.pdf

I could only get my 630 to work with industrial CF cards. https://www.savagetaylor.com/2023/12/17/ide-replacing-your-old-ide-drive/ That initially worked, currently my 630 is having issues but i think it needs a recap. If your 630 has not been recapped that may be the root cause for you too.

Did a quick search. Mac OS 8.1 was the first system to have official UDF support. So perhaps 68k systems capable of running 8.1 can access DVDs

7.5.2 for PowerPC 2TB support. AND any system released with 7.5.2, not sure if there are any 68k systems released with that version. https://www.savagetaylor.com/2018/01/01/mac-os-standard-format-specifications-apple-kb-article-8647/

I assumed that was the case, but I wasn't sure if the issue with the Plus lacking terminator power was no power or not enough power, so I suggested the USB connection to be sure.

A Macintosh plus does not provide terminator power. Are you providing power via the USB port on the ZuluSCSI mini? You could also try one of my image files https://www.savagetaylor.com/downloads/downloads-macintosh/

I haven't tried this yet, but could you use https://github.com/saybur/scuzEMU to import the ini to you mac, edit it and save back to the SD?

You can use industrial CF cards to get back the correct IDE support, or use ZuluIDE.

The front comes on and off fairly easily, and I doubt i would be changing the contents of the SD card often, I would more likely want to backup the .hda file before making major changes

What about a ZuluIDE?

Anyone else thinking of trying one of these in a Mac that supports IDE? https://picoide.com/, https://www.crowdsupply.com/polpotronics/picoide I was thinking of getting one to try in my 630 DOS system to see how it compares to my existing CF2IDE adapter. For the 630 I assume only one .hda image...

For both the PB150 and LC630 there is an enabler that is required when you want to use the internal IDE drive after booting from a different device, e.g. CD ROM or external SCSI. https://macintoshgarden.org/apps/select-cpu-enhancements I am not sure if the are needed for 7.5.3 or not, but you...

Sigh, tried to use my LC 630 today, I think it needs a recap. It will boot from the CD ROM but will not boot from the external SCSI or recognize the internal IDE.

Did not have a chance last night, will do a "for all systems" install so the right enabler should be there.

No problem. After trying a few key word combos I tracked it down. https://68kmla.org/bb/threads/se-video-adaptor.51346/post-579072 For the gamma controller do you mean https://macintoshgarden.org/apps/gamma

Thanks, I think I found the thread you mentioned Post in thread 'Unknown Mac SE PDS card' https://68kmla.org/bb/threads/unknown-mac-se-pds-card.42060/post-500401