Search results

video amp IC is mc13282ep https://www.datasheets360.com/pdf/-8350414490174498621 Should I check Pin 9, 17 (power supply voltage) And then 2,4,6,8,10,12?(Video amplifer inputs)? G2 and Focus are the 2 wires coming off the flyback I assume?

I just reseated my RGB cable to the neckboard, same deal. @Unknown_K any luck with the one you picked up with this issue?

This seems to be a semi common issue, so I wanted to get all my notes in one place bsteckler: Replaced flyback with the one from Technotronic Dimmensions(same part number, but different revision), recapped analog board. Fine for about a month, then had this issue. Replaced PRAM battery, issue...

Forgot to mention. I lost sound in mine as well. (I assumed I just didn’t hook something up until I saw your comment)

Did you replace the flyback too with the one from Technotronic Dimensions? edit: Do you have a PRAM battery in your board? I talked with bsteckler(OP) through PM's yesterday/today and they said one of the things they did was use a new PRAM battery. Have had it on for 20-30 minutes with no...

For anyone looking for recap services, I see Amiga of Rochester on Facebook/Twitter still pretty actively, so one of those places might be the best place to contact him. https://twitter.com/amiga_rochester facebook.com/AmigaOfRochesterNYUSA Another option is Joe Strochnider from Joe's Computer...

Do you hear the eject motor spinning at all when you try to eject it?

Thank you so much @bsteckler ! Did you do the recapping as preventative maintenance, or was it starting to have issues with leaking caps?

Thank you for uploading that video which 100% confirmed that this was it!

almost 2 years later, "Rock, Rap'n Roll" is what I was thinking of! By chance I came across it at a video game expo while looking through a table of big box PC & Mac games! As soon as I saw the box, I was like "wait a minute..." and looked at the screenshots on the back and was 95% sure it was...

True! The other advantage of the aftermarket ROMs is (at least some of them) disable the full RAM check upon first boot. So if you max out the SE/30 with RAM, could definitely decrease boot time(but yeah, that's also a bit of a niche usecase)

Take a look at this...

long story short, and after much parts swapping, its an issue with the CRT tube. swapped it with another one and that works

Spent some time playing with my Airtalk today. When I first connected them, I connected them to my eero network(mesh wifi system, but both the airtalks were connected to the same AP), and noticed it was really slow. Don't have a speed or anything, but had 1 connected to my localtalk imagewriter...

Oops, for the line that says "tap around the logic board", that should say "Tap around the analog board" (If only we could edit posts)

video - Analog board has been recapped, no cracked solder joints or anything that I can see. I reflowed the joints for the flyback, and all of the connectors that go between the logic board/CRT. Happens with multiple logic boards If I have it on, and tap around the logic board with the...

Hey all, I picked up a G3 AIO Molar Mac a few weeks ago, has some flyback issues so I'll be replacing the flyback with a new one, but figure while I have it open I would like to recap it too so I don't have to open it again in the forseeable future. Does anyone have a cap list handy for the...

Try the RaSCSI-Boot-7.5.3.hda_.zip https://macintoshgarden.org/apps/rascsi-68kmla-edition Unzip it, and renmae the file to be hd10-512-machd.hda

the image probably doesn't have an OS on it

The image needs to be a HDA file placed directly on the SD card. It looks like you somehow extracted the image or something?