Search results

Hi Thank you ! It's note the ROM from Ethernet board (i have dumped the ROM too). I have annoted a photo.

Just in case : i have dumped the ROM from the LaserWriter Pro 810 and i serahc to extract a PostScript File (i mean). The ROM is here : down.dandu.be/ROMcostena.bin Actually, there is an easter egg on the printer : it's possible to send a fax directly to a restaurant (La Costena) to command...

A friend dump the two others chip for me and... YES ! http://down.dandu.be/ROMcostena.bin It was true : there is an easter egg about burrito on the ROM ! (there is many text string about the restaurant, the burrito, etc.) Next step : i will try to extract the text (i suppose it's a postcript...

I have one too :D But for the radio, it's only for the command : the sound need a jack and a 3,5mm jack

I have one, and i have made review (in french) : https://www.journaldulapin.com/2019/07/26/modem-adb/

For Voodoo 1 and Voodoo 2, you can use generic driver and PC card. Fun think, you can even use a Voodoo with VirtualPC or RealPC and use the 3D acceleration. For Voodoo 3/4/5 (and Banshee), you must use a card with a Macintosh ROM, for the 2D parts.

Actually, there is two other chip with "data/rom" on the sticker, but i can't dump it now : the chip is not the same and my adapter cannot dump it. And dougg3, for the checksum, the first time, i have not seen that. But when i have made a second dump to be sure, i have seen the value and "tilt"...

AM27C040. Actually, the checksum is on the stickers and i have the right value.

I have an update (and a problem) : i have buy a card with the ROM, i have dump the ROM (many chips) and i can't use it. I think the ROM chip are interleaved, but i don't know how. I search the postscript into it (if there is a postscript inside :D Can you help me ? It's the 4 chips ...

Hi I have a question : i search a person with a Performa 550 and the original hard drive. Actually, i have found an article on a book who say "MACINTOSH SECRET: THE LC 550’S SECRET PARTITION If Apple’s programmers, in creating the Performa series, were aiming to make idiot-proof computers...

Hi have found this image on a disk image, but i can't find the source. Can you help me ? I suppose that the file is an easter egg from an old Mac app'. https://www.journaldulapin.com/wp-content/uploads/2021/11/Hard-Disk-converti-2.jpg

The iMac has the floppy connector. The connector is on the image (the white cable). And the ADB is on commercial Mac too, but unpopulated (like floppy). It's just more difficult to add it, there is many component to solder.

I have one, and it's complicated to find. Actually, i have searched a long time on ebay, and watch all the photos. And i have buy a "QuickTake 100", but it was a "100 Plus". (with photos : https://www.journaldulapin.com/2017/10/01/quicktake-100-plus/) The 100 Plus is just a curiosity : it works...

One year later, no one ?

I have try that with two Farallon EtherWave adapter (LocalTalk to Ethernet) : https://www.journaldulapin.com/2020/08/17/localtalk-rapide/ There is a special driver (with a specific interface) and the speed is higher.  With a classic LocalTalk adapter, i can transfer at ~160 kb/s (real). With...

Technically, it's (perhaps) possible, but Apple don't do that. Even if you flash the card (or use a "compatible" card), the driver don't do that.  I suppose it's a little bit complicated to make a new driver to do that, and by the way, many Mac can use an AirPort Extreme (compatible) card. 

The first AirPort Card is a "subset" of PCMCIA. Actually, you can use an AirPort card into a PCMCIA slot, but not a classic card on the AirPort slot (i think Mac OS and Mac OS X just block that). And you can't use WPA2 with this sort of card. To have WPA2 on Mac with AirPort original slot, the...

One thing to know : i have a 12" monochome and the display works only with old Macintosh. I have searched many times to found a solution : the display need composite sync avec many modern computer don't do that with adapter. I have made an adapter for that...

I have buy an "ADB" joystick on eBay, a MacFly. But when i have received the joystick, i have discovered one thing : the joystick use a serial connection And i have not the floppy with the driver I have searched on the net, and i have not find a copy ANyone can help me ? It's a MacFly...

It depends. It will work in a Power Mac G3... if there is a jumper to disable the BIOS from the card.