Search results

danny.g - it looks like you have it all worked out, but I had a similar situation a few months back and experienced the same initial sticker shock that you did. Shortly after that, I found an excellent AB with flyback that was less than $40 shipped.

It looks like joshc is parting with his? ...from an earlier post, featured in the eBay listing.

...or two 1/2 years later, I might be re-capping the sweep/PS board in the 512 and something inside the case finally becomes dislodged and basically falls out. Yep, not only did I buy one of these a few years ago, but now, I have my original back! I guess I just needed patience measured by...

Thanks, and great direction with the little black clips! After reading your post, I tried focusing on them again, using a lock pick tool stuck between the plastic piece and the metal they seem to wedge against, while standing the CD upright (connector side down) and this allowed the inside...

I have several of these CD-ROMs that have come from Macs that have been recycled in years past. They are various models, but fairly identical over a date range of a few years and they all have the same case design. Since I have been going through floppy drives and refurbishing them and these...

When I attempted to hook this up to another SE a few weeks back, perhaps I didn't terminate it properly, because it did not show up on the SCSI chain at all. However, when I tested it last night on my Q650, it started right up. As for the Master/Slave/Cable select, I'm guessing they just...

If there is a chance you will be taking it apart again very soon - like you are still working on it and troubleshooting issues, there is no need to put the dielectric grease on yet. When you are ready to assemble it for the (hopefully) final time... Coat here on the inside... plug the cap...

I poked around a bit to find out what you were up to in there - very, very nice! :cool:

Okay, the miniscribe works too. I gave it another chance, and it fired right up (relatively speaking). Poked around on it for a bit, System 6.0.8, some early networking, MS Word and a couple other things. Mainly, just seeing if it would freeze up or anything like that, but it seemed solid...

Turns out the ones that I have (found them) required a bit of interesting positioning as well - I've installed them in a 45 degree sort of thing on one of the replacement boards that I had. I have been collecting a few non-working boards for the day when I would have a really bad one and need...

Can I use the same stuff I use on my spark plugs?

This link from another forum seems to reference an attempt to retrofit other similar size/type monitors - obviously with a different purpose, but it contains information that may be important as you look for a replacement, specifically how to intelligently source/use a different CRT. Here is...

I already have one that I bought a while back that had been upgraded with an SSD and memory before I bought it, so all the really hard work was done. I love the list of tips that you've posted, along with the links, since running Mac OS 9 on this hardware is one of the fastest and space...

Even though I've started re-capping some of my worst-case examples, I would be just as happy to fill the cases with new, replacement PSUs that came from a project like this thread is working to create, because I have several more SE and SE/30s that will eventually need a solution as well. If...

I'm re-capping my second one of these - the first one was pulled from an SE and exudate from the caps had actually been leaking (slightly) out one end of the power supply! It now works great after the re-cap.

What imacs said. I would also mention that since there is no picture of the latch in that service source, but note that the Q650/C650 PSU is similar and that the latching mechanism is shown in their service source, so you can get an idea of the position of it from that picture.

I would take that statement a bit further, IMO, since finding an original, unaccelerated, unmodified Mac II proved very difficult for me for some reason. As a result, I have 3 complete machines and only 1 turned out to be an original Mac II. If I could get my hands on another power supply and...

I don't know if this helped @mloret , but I'm bookmarking this thread!

Me too - in fact I'm pretty upset with you right now since it looks like I'm going to spend a lot of my evening reading the rest of this magazine as well! Current thread from our marketplace that references a MonsterMac... https://68kmla.org/bb/index.php?threads/1984-macintosh-must-go.47019/