I just recapped a Sharp passive matrix display from a PowerBook 160, it worked fine for the first hour but then the top half of the screen started flickering and went dark. If I crank the contrast I can see the top half flickering in darkness.
I think it could be a bad connection with one of the...
By now it's more than likely that the rubber bumpers inside the hard disk drive have turned to goo and the head assembly is stuck in place now. It happens after 30 years. Sorry
This is the soldering iron I've been using for about 2 years now -> https://www.amazon.com/dp/B097XX76V4
Throw away the solder they include. Use this instead -> https://www.amazon.com/dp/B09KM1W7MW
Throw away the tiny sponge too. Get a larger one.
Yes, that iron is cheap. But I've successfully...
Look harder. It's almost always cracked/cold solder joints. Sometimes they are barely visible.
Reflowing should fix it. If I recall correctly it's usually a crack on the the logic board cable socket.
Everything is well and good with the 1.2.1 ROM in my IIcx. I just wanted to try upgrading the ROM in case the card finds itself in a younger machine down the road. But I will not use a newer ROM if it disables features.
I tried Bolle's ROM in my Precision Color 8-24X, and it maxes out at 1024x768. Also doesn't show up in the QuickColor control panel from RadiusWare 2.2.1 so I assume acceleration is not working as-is (probably needs newer RadiusWare version). I will revert to the ROM 1.2.1 which came with my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.