Search results

One of two ways, I have an oscilloscope that I can see if there are video signals coming out of the BNC or I can borrow an RGB-DVI 300A from a friend. Hopefully I can see the signal.

Finally got around to getting os 6 on my BlueSCSI and success! The accelerator works, now I need to figure out if the Page 2 adapter is working

So the accelerator by itself worked. I will try installing OS 6 on the BlueSCSI and reinstall the display adapter

So I have spent Christmas break working on getting my Mac SE up and running. When I got it, the CRT would not come on. I replaced the CRT and the neck board and the Mac SE booted. I have a Radius Accelerator installed and the Mac SE booted up using my external BlueSCSI and running 7.1. I also...

What fluid solution do you use in your ultrasonic cleaner?

I love the fact that there are amazing skills out there and that open source enables crazy ideas like this. Are 68060 processors more plentiful than 68040 @ 40mhz?

Where did you get your ROM programmer? Also is there a file I can use to tone out my board to make sure my solder joints are correct?

I did try toning out the pins and lines. I do not have a diagram to verify the proper signals but for the most part the tones line up with what I think is correct. What do you think could be the problem?

Hello everyone. I purchased a Mac Plus Rominator. I have soldered the parts together but when I install it I get a checkerboard screen. I think that I might have screwed up the ROM chips. What ROM programmer should I purchase to reflash the ROM chips? Here are some pictures of my work. Let me...

Success. I got the new processor and it chimes I did have to do a few barge wired

Makes sense. How did you get into cloning cards? What tools and lessons could I get into to possibly start. I have some ideas cards that I would like to try my hand at reproducing

would that be a card that you would be interested in reproducing?

Would you mind taking some very high resolution photos of the card and sharing them?

mmu_man, were you ever able to get this to fully work? I have been in contact with Paul over at FlexBV and he has run into problem with "network name information in this specific file"

That is what I would like as well. I am just learning about circuit board diagrams so I am not the person create the new board. I wonder if we could get someone that has experience to clone it.

Would you be interested in selling or training it?

Was there any movement on a clone of this card?

It isn’t the prettiest but it tones out. I broke a pin of the processor. So I am off to the eBay to get a new one. I did try soldering it back on but it would just break off each time. So what is the difference between the 68000p8 and the 68000p10? Is it just a different revision?

Well today was the big day. I got the chip out. I also got the new socket in. Things went okay. I found 3 broken traces but was able to scratch out some wire and bogded them back together.

Perfect, thanks!