Search results

Thanks chillin.. yeah I was just gonna try it my way first as it appears they made it keyed with the missing pin. Moving it over to the left would leave ID#0 with a jumper with no wire in it... And it appears there is a red and black corresponding for selecting ID#1 which I think is what it...

I may have it! Back in the day I used Hotline Client... oh I miss those days.. I have SuperNES and NES with tons of games and I think I have GameBoy with games... would have to do some serious searching... lol

Chillin thank you for your input. Yes there are a few different scsi busses on the ANS. If you search for the Apple Network Server Service Source document online it explains a lot. I understand the SCSI bus chain. According to another person I know and the manual it says not to assign id's on...

I do not have a raid card in mine. And another guy who’s an expert said not to terminate it. Apparently the backplane board assigns scsi id’s to the devices. Looking at the CD ROM and the one scsi Baracuda 2gb drive nothings terminated. I’m just trying to figure out if I have the connector on...

Very interesting chillin!!! Hey can one of you guys give me a hand? I've installed the HP C1533 DDS-2 DAT drive and I want to make sure I have the SCSI selector connector plugged in properly on the pins of the unit. There is a pin all the way to the right.. where it says NC then there is a...

Scutboy yeah it totally bites to find those nasty surprises! I’m very sorry to hear about your experience. Every machine I own has any and all batteries removed no matter what. I just have one SE/30 that I have one in.. but that’s it. It goes without saying it can’t be repeated enough to...

Trag Im sure glad you pulled that battery! Anyone else who reads this thread should do so immediately! What was strange is that it wasn’t a red Maxell battery.. it was the white one with green stripes! I am glad you did that! Whew!!

Byrd no problem!! I appreciate your help. I'm just waiting on a new logic board for my ANS... when I bought it they had left the battery in and you know what happened... But I've got her all cleaned up. All the rust gone! Just waiting on the board and an HP C1533 DDS-2 DAT drive. I have to say I...

Wow finding this RAM is REALLY a challenge! Of course Apple had to use really oddball RAM on the Apple Network Server 500/700

Thanks both Trag & MrFahrenheit! At least it's something to start with.. it appears it must be 5V not 3.3 and researching 64 bit non-parity is ok... the parity is the 72 bit? Yes or No? I am by far not a memory expert..

Yes I agree about the parity bit (no pun intended) trag thank you. Any ideas of a search with the proper ones I could find on Ebay? I was given a little advice by Siliconinsider.. He said "Count the chips on the modules you find, if there are 4, 8, 16, 32, it's non parity 64bit. 72bit parity...

I’ll look for them and private message you ASAP!

Hey gang.. Another question.. anyone know where the RAM is for this. I show in manuals that it is 168 pin 60ns parity 72 bit and in 16, 32, 56, 64MB sizes.. I have looked all over ebay and cannot find the right modules.. could someone assist me?? I basically want to max it out at 512MB so that...

Thanks Byrd!! I think I found out it’s a DDS-2 scsi DAT drive. But if you can find out the brand snd perhaps model # that would be great. If I get a replacement IBM if it is that I need to make sure I have the right jumpers to match. So if you happen to know the jumper configuration that would...

Anyone know the 50 pin scsi model type drive they used in this server? Was it an apple brand (which I do not think) or what brand was it and perhaps the model number. I have an ANS 500 with no DAT drive and I want to fill the space with one.. Any assistance is greatly appreciated!!!! Thanks...

You should also recap the display! This is a tricky job. I'd follow the Apple take apart procedures to remove the top cover of the display. I use a small needle to get under the screw covers and gently move around to get the plastic covers off the front. Be careful not to bend or stick the...

Oh geesh this was so long ago.. I believe I still have a bunch of the diodes I used to fix it. I can send you one. PM me. :)

Hey Trash not to spin off RAM topic but Techknight and I discussed a while back if it was at all possible to create an accelerator card let’s say using a 68020 chip in the PDS spot? Or would all the other components have to be modified. It’s my understanding that the PDS slot was originally...

If Techknight saw this thread he’d blow his top. As he said in many, many threads never to use any other adapter than the one designed for the portable and a good battery. It is so easy to fry a board or the hybrid or any of the other chips for that ma. If you cherish your Portable please only...

The card is generic. No manufacturer name on it. It’s an orange color pcb. The odd thing is stamped on it says 6MB but it only had a total of 4MB.. I’ll take it apart later to grab a pic and post.. I have another 4MB one that’s blue pcb and I think that’s a brand name.. they left again spots for...