Search results

Hi, thanks @DarthNvader for the instructions. I'm not sure I did it right. I don't think I typed it correctly in DeviceName because it looks like a full dump. But the two files have different weights just by changing the graph, so I assume all the information will be there.

Has anything similar happened to anyone with this model?

Quicksilver 2001 Exact, it's here.

That's right, none of the ATI Graphics Accelerator programs I've tried have load; they all appear crossed out. How can I dump .properties using the ioreg command line tool in OS X? Thanks.

Hi, although I already mentioned something in this thread, I was only asking how to adapt a SCSI disk that was not from a Mac. https://68kmla.org/bb/index.php?threads/hd-scsi-for-powermac-7600.46081/ Shortly after those tests, I decided to add a SIL3112 SATA PCI card, a 160GB 3.5" SATA HDD...

Yes, but if you look at my photos, they both have ID 514c. I can't change it to the same number. What should I put? On which driver? What software allows me to do this?

This afternoon I tried every driver I could find, even those for the Mac Mini G4, and the same thing happens with all of them: ATI Graphic Accelerator appears crossed out, and the desktop is left without icons. If the IDs for the 8500 and 9100 are the same, I assume there's nothing to change in...

Okay, thanks a lot!!! I've ruled out any other possible symptoms of the problem. I'll keep investigating! :)

Hi, let me revive this post. Shortly after those attempts, the PM7600 stopped booting. When I press the button, the LED lights up, but no chime, no image, or anything. If I press the button again, it immediately shuts off. It's been sitting idle for a long time waiting to recap the PSU, because...

Thanks for the tip. I'll look into it, but I don't know if I'll be able to; I've never been very good at modifying drivers. From my ignorance, I understand that the 9100's ID is in the hardware; it's not something you can add to the ROM, right? Reviewing the photos I added earlier, both...

Thank you all very much for the ideas. I've run several tests and think I've found the problem, but I can't find a solution. First, I compared the Radeon 8500 64MB with the Radeon 9100 128MB using xbench, and both have similar results; one has more memory, but the other uses it faster. I think...

The Ati Displays control pannel?

:) Ok, I'll try Quake 3, I've never played it, but I was referring to some software that allows me to verify that it works correctly, OpenGL, and other things.

Thanks for your answers, I'll continue testing as you suggest. Doing a Google search, I found this link from another user with a similar result: https://aquamac.proboards.com/thread/1485/radeon-9100-128-mb-vram What software can I use under Sorbet to test graphics performance? I could compare...

Hi, I recently found this used 128MB Radeon 9100 for a good price and decided to flash it for Mac: For flashing, as I don't have a PC, I use a TLL866 programmer and I have a few 25P10 EEPROMs to replace the original 25P05, which I have used with other graphics cards (7000PCI, Radeon...

Yes, I know how to do it, I have done several G4 CPU swaps.

This afternoon, I had a little time, and I reflowed the CPUs. But the result is strange. Now the GE won't power on. Sometimes the red LED on the motherboard lights up for less than a second, then turns off again. No matter how hard I try, it won't power on. If I put in another CPU card, it...

Perfect, thanks. From what I understand, your patcher didn't remove anything from the original patcher; it's still valid for the 7447 and 7448, right? You only added the new G3s. This way I can make a boot CD and save it as UNIVERSAL. Thank you for the work you have all done; it's a shame I...

No había visto esta foto, hiciste un intercalador. Eres brillante. Ese es mi problema. :)

Although I'm pretty decent at electronics, messing with firmware is difficult if I have to type commands. I don't like doing it without understanding what I'm doing. The Newertech patcher I've used on some G4s has been a Newertech BootCD. I boot the G4 by pressing the programming button, and...