Search results

I've found its the amount of cap goo leakage that affects the pads causing them to lift with either method

Thanks already have a laptop version but no laptop!

Anyone know if its possible to adapt the 2.5" laptop version of zuluscsi to work on 50 pin scsi eg SE etc?

Yes 9.2.2 runs really well on these

Update: Still dead. A job for another day. Managed to find a replacement Logic in the UK

Nice score

Should the light on the switch stay on . When I press mine the light comes on but then goes of again

Power button seems to work but could be a problem? One short press switches the red led on thge logic on a lond press switches it off. @herd yes I'm going down the temperature route and the board does have the mod I'll have a look at that as well. Thanks everyone, appreciated

And its dead again!! tried to install MacOS 9.2 started OK then froze and won't go again. I think its the logic board unfortunately

OK bit the bullet and put the XPC7400 RX486PK in and miraculously it works. Looks like its only a 350mhz chip? but it is at least working. We'll see if it lasts

Just hunting through the junk box. I've a XPC7400 RX486PK, the cube has a XPC7400 RX450SK. Can I try this to see if its the CPU? Also found a XPC7400 RX450PU

@Scorpio tested video card in G4 tower works.

Thanks done all the cleaning, checks etc thinking logic. I've replied to your DM cheers

A recap and still dead!!

And its dead again For no apparent reason won't boot again. I've not read anything about caps being a problem on cubes but is it a possibility?

Some success did another PRAM reset and got to the flashing folder screen. Looks like the CDROM and HD are cactus so next I'll try a firewire cd drive.

Yes tried that as well

Yes have speakers and get no chime. I'll try the external drive but have no video just black screen. No usb mouse light up. Doesn't appear to be booting at all as I said if I connect the hard drive to the IDE cable it doesn't spin up. Done PRAM reset.

Hi herd thanks for replying. Single press switches it on, red light on AB and HD spins up if IDE cable is disconnected. Press and hold switches it off.

Hard drive spins up when power button is pressed but only if the ide cable is not connected