A 1400 should take 9.1 by default. If the installer is not working you might need to check what the localization is, etc.
You might do a bit of googling about this if you want 9.2.2:
http://eshop.macsales.com/OSXCenter/OS9Helper/Framework.cfm?topic=32
*Edit
Oh, looks like it might be a bit...
I might be remembering incorrectly, but I was under the impression from some random website that the dual slot boards were the ones that took DOS cards or something. YMMV
I do know that my Performa 580 board has two RAM slots and my LC 630 has only one.
http://en.wikipedia.org/wiki/Heat_spreader
"A heat spreader is a heat exchanger that moves heat between a heat source, and a secondary heat exchanger whose surface area and geometry are more favorable than the source."
http://www.thermacore.com/products/heat-spreaders.aspx
"Heat spreaders let...
Just so we are on the same page, you are talking about removing the black disc, right? Black disk being the heat spreader held against the CPU die by a square plastic piece around the whole CPU package. Then the big metal plate under the keyboard is the heatsink.
On the underside of the black...
A few years ago I pulled my PDQ out and the fan had started running constantly. I unplugged it. Perhaps because I live in Canada or not, I have never heard the fan come on under any load and I had actually tried using it on soft surfaces at some point in the past. The fan in my Lombard also ran...
Internet says 18.5v for 2009 models and earlier, is that right?If both PSUs put out the same voltage but one is lower wattage, then you are talking less current. As long as you do not trip the PSU's overcurrent protection it should work for testing purposes. If anything is going to die it would...
That is really sad. I used to push four hours with my (very cheap low end model from 2009 keep in mind) HP DV4-1225DX while internetting on a new high capacity battery, and that had a terribly wasteful AMD CPU. IDK what my Thinkpad T510(from 2010 or something mind you) would do with a new...
Well, about the thermal compound, I personally have a preference for IC Diamond. Even more so when it is going to be in use for a long time since it resists pump-out. However ICD is likely overkill for a PB. For anything like old notebooks that I care less about or something I am likely to take...
I am not sure how hot MDDs normally run but have you made sure the fan you installed was pointing in the correct direction for the MDD case?(and not just the same direction as the previous aftermarket fan was installed) Also, have you checked any other fans to ensure someone did not screw around...
According to a quick google, DOOM II requires 256 colours and 68LC040 above your setup.
http://www.allgame.com/game.php?id=532&tab=sysreqs
But you can always try the Shareware MacDoom in the non-DOS section: http://www.doomworld.com/classicdoom/info/shareware.php
Apparently Ultimate DOOM...
Because it is from the mid 90s, and they are paying to host something that has had no bearing on anything they have sold in pretty much two decades at the least.
It is nice when you get this sort of resource hanging around for decades but honestly, a _lot_ of the people using it these days never...
All the information you need for flashing the 7800GS or X1900XT is all online. Make sure to backup the original ROMs first!
I have not looked at info for either of these cards in a long while but I would bet flashing them in a PC would be easiest.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.