Search results

Here are the naked boards, they look nearly the same.

In my opinion the only way to put such a thing into the PM6100, but I have to cut those in order to make the fan fit and not bend the hdd-bay to the top.

Yes extract fan but if you look how thy are designed this will not work. Only way seems that it does not blow out and therefore blows out to the CPU's.

Yes I have two of them but I have not figured out how to get the plastik out of the machine and I believe it would be put top2bottom and it sucks air in the machine and blows it right to the both cpu's (PP66/486/66) or am I wrong here? It should be placed under the harddrivebay which is in my...

Target1 => This is done by BOLLE so this could be marked as done ;) Target2 => I already bought some 28x28x6 and some 28x28x8 heatsinks in china and I will perhaps receive them in some weeks. Target3 => I will check if some finemecanical-oil will do the job. Target4 => Some mentioned that he put...

Hi there, I want to optimize my 6100 machines these are the targets: 1. Replacing the caps on the board 2. Adding heatsinks on the big chips 3. Checking the fan on the power supply 4. Adding an additional fan to the case 5. Adding a bigger L2 Cache Hopefully someone can give ma some tips on...

Thx, sorry for the bad quality, I will make better videos soon. Now BOLLE checks my three 6100 Boards and replaces the caps to make them last the next decade :) ! currently I switched to blueSCSI and ID 0-4 5/6 are for CDROM and Zipdrive. I got 7.5.3 installed and also MKLinuxDR1... Linux...

Yes I am only interested in 512KB or better 1MB L2-Cache Modules for my PM6100 machines.

Perhaps someone will produce such cache simms again. I have three 6100 machines that require an upgrade ;)

Can you please take a picture of the cache-simm...I am very interested in these. I am searching for years to get such a thing.

Mine supports 640x480 256colors, so I think it's already updated (but I have to check this). Please check this, my card syncs to 640x480 67hz, but only on that BL702A, every other TFT fails. I already used the dip-switch at this setting on every monitor. As I said, only BL702A works and...

Hi there, if you have a tobi-card and use a TFT please let me know what TFT it is and what adapter-settings (DB15->VGA) you are using. thx! I checks about 20 different TFT Monitors and only the Benq BL702a worked, all others did not. Thx Doc

Setting up my 6100/66Dos too. I am using 7.5.5. and I will install MKlinux as well. Never thought about Linux for the Doscard. I am using Dos62/Win31. Older video, now switching to BlueSCSI.

If anyone found a seller for these PM6100 cache-Simms with 512K or better 1M, please let me know. Thx! https://web.archive.org/web/20071228035443/http://www.kan.org/6100/l2cache.html

PM6100/66 = 486DX2/66 Doscard Anyone got Windows 3.0 working on the houdini card. Windows 3.1 is working fine. Win95a seems to be to slow and therefore worthless in my opinion.

Using "system picker" did the job. :) Don't know what went wrong before.

Thx, but after copying the files back I put the backup away and it boots right of the internal harddisk, but it does not load anything (except the system and the finder) that's inside the system folder anymore. The system-folder icon is still correct. I don't think that this is my issue...

Hi there, where is the definition what files are startet in the system-folder on system6 ? I did a backup to an external harddrive by dragging the drive icon to an external scsi-hdd. After a restart the system still boot's from that external backup even if the "system-folder" is not in root and...

THX!!!

Thx, machine has IIe card, so 24Bit adressing, System6 because of single finder. Best regards.