Search results

Yes, I was just calling this to @RolandJuno 's attention so they could check for misconfiguration.

@tashtari - Here is a localtalk trace of the IIe connecting to the netatalk server over the Gatorbox (no TashTalk active). In this situation it stays connected as long as one would wish. There are numerous filter options and other tools that can be used for this, so let me know if it's...

Just for completeness' sake, here is the configuration for my Gatorbox (which has NOT been running during the captures I posted above). I'm getting ready to capture localtalk traffic between the Apple IIe and the server. Configuration Information for GatorBox "Gator_Hirsch"... Tue, Mar 12, 1996...

Interesting. I have a tap/tun setup here and in mine eth0 does not get an IP address: root@tashtalk:~/tashrouter# ifconfig br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.245.48 netmask 255.255.255.0 broadcast 192.168.245.255 inet6...

I'm going to try to rope Geoff Body into this discussion. I have a feeling he knows right off the bat what's going on.

Based on the symptoms you describe I believe you are now seeing the same session drop as I do when networking an Apple IIe across the tashrouter.

The IWAT ROM is Apple part number 342-0034-B, but I'm not finding a dump in my archives. I have the board here and will image it a bit later today. UPDATE: Here is the firmware from the IWLT board, complete with the developers who may be blamed for it :-)

Here are a couple of captured traces from my setup using an unmodified tashrouter. The 'a2e.log' starts slightly before I boot the IIe, logon as user 'a2e' and mount A2BOOT and A2E shares. There's time for one or two directory listings of /a2e before it "loses" the server. The 'a2gs' log is...

Which file, for those of us not familiar with the code yet?

That's what I meant when I said "forward long packets on behalf of the sender" in an earlier post above. And at least one design is stateful: If I remember correctly the ImageWriter does not answer NBP lookups properly. Instead of sending the answer to the node mentioned in the NBP header it...

I was interested in capturing Apple IIe session traffic, not Imagewriter snooping. That's what @tashtari requested a few messages up.

I currently see a setting of: logging.basicConfig(level=logging.DEBUG, format='%(asctime)s %(levelname)s: %(message)s') but there's nothing coming out but initialization messages. No traffic. How do I make it more talkative?

This is interesting: I've seen a problem with ATIWs and gateways, if the NBP lookups to the zone which the ATIW is in is sent to a gateway and that gateway resends it using a type 1 (short) DDP packet, the name listener in the ATIW seems to reply to the gateway, rather than the requester address...

Wireshark is not a problem, but a few minutes poking around the web fails to turn up any localtalk packet sniffer able to run on a 68k mac. Do you have a package name I can look for?

I hate to bring this up, but is it possible that the router needs to hold some state to properly route the reply packets back to the original sender?

I will offer - again - to run packet traces on the setup. I just need a modicum of information on how to setup for this. I assume Wireshark must be run on the Pi Zero, correct?

I have been working on a stripped down network. Netatalk 2.1.1 running on an ARM based appliance serving my lab ethenet network. TashTalk hat on RPi Zero W (latest TT firmware and latest tashtalk and tashrouter builds). The Pi Zero is connected to the network using a USB-Ethernet dongle. The...

I believe LtoUDP uses multicast. In my limited use of it the minivmac client was able to find the TashTalk device on its own.

Yes, it seems like there's an issue with the TashRouter code. @tashtari - Would it help if I grabbed debugging output from the router for working and non-working LT clients?

I found a nice, pre-built hard disk image for OS 7.5 and booted that in minivmac (I also have a code for the builder tool). After setting up sharing, I was able to log into the guest system, list the root directory (shared folder was not seem by the A2 client) and copy files back and forth...