Search results

I was playing around with White Knight terminal program and noticed it had a Host Mode option. It's pretty bare bones and you don't even get a prompt when you connect. In fact, all the Host Mode does is monitor incoming text for certain keywords like DRIVE, DIR, SENDY, RECY, etc. and they must...

Getting a little better frame rate with the Pentium:

Ok, figured it out. I was trying to install it from my shared drive (F:) instead of the C: drive. All good now!

Ok, good to know. I got Doom95 working in Windoze 95. Any trick to getting the DOS version to work?

Anyone have any luck getting DOOM to run on a PC Card? I recently got a Reply DOS on Power Mac card w/133MHz Pentium for my Power Mac 7600 and have Wolf3D up and running fine but every version of DOOM I try crashes. Here's what happens in Windoze 95 (which is the same that happens in DOS) when...

That fixed it - thank you so much!!

Thanks for the tip - will check it out!

When you have some time, try copying some CD-size files and see if it happens regularly. Then try it with extensions off.

Hey guys, My Quadra 605 w/BlueSCSI v2 running System 7.5.5 freezes up intermittently when I'm copying large files between hard drives or from my server. I thought this might be from overclocking the logic board to 33 MHz, but it never freezes with copying when all extensions are off. I've...

I removed it since I was the only using it (like most things on my BBS! :))...

Looks fantastic - thank you for developing new games for our vintage Macs! This will go into the New Mac Releases download section of the BBS shortly.

Very cool! Will this mess anything up if I install it on my PiSCSI?

Passe?! According to Telnet BBS Guide, there are over 1000 BBS's still active! :) It depends on the type of BBS you want to set up - only a few support TCP/IP connections including the latest version of Hermes II, Subtext, and Public Address I believe. Otherwise the only wifi modem that you...

Very cool setup! No LC III in your collection?

Awesome story - thanks for fixing this after all these years!

Ordered! Do you include instructions on how to flash the Macintosh-compatible firmware to the board?

Very cool! A few other ways to print from your vintage Macs to modern printers: Via LPR: http://bylenga.ddns.net/index.php?page=68KPrinting.php Netatalk papd print server: https://github.com/rdmark/netatalk-2.x

Looks fantastic!

From D Finnigan on CSA2 newsgroup:

It's been years since I set this up but I remember having similar issues. I was eventually able to get it working between my SE/30 and another PPC Mac I think. I believe the problem was that it didn't like my SCSI to Ethernet or LocalTalk to Ethernet converter, and that it required an actual...