Search results

The 5-pin DIN is only seen on the PowerKey Pro 200, as far as I know. I believe the PowerKey Classic's Y cable just tees the 4-pin DIN straight. Yeah, I got my hands on one of these recently, only to find it's not actually a device on the ADB bus, it just pulls the ADB power-on line low when...

Interest check time! I'm considering putting together some TashPad kits for the US audience. I haven't priced out such an endeavor but I assume it'd wind up being similar to @demik 's EU group buy, that is, somewhere in the neighborhood of $30 for the PCB, parts, the case, and the case front...

ADBDB kits are back in stock over at my Ko-fi shop!

I've made up some kits for new DE-9 PhoneNet dongles and put them up for sale on my Ko-fi shop.

Interesting, the specs on page 11 are the same as those given in Appendix A of Inside AppleTalk, and the specs on page 4 are similiar but slightly more permissive... Like @cheesestraws said, though, it has an odor of "this is what we used" rather than "this is what is required" about it. The...

Looking into it more, MicroPython's threading support is "highly experimental", which is a problem, TashRouter depends heavily on threads. I like the idea of using MicroPython, though, I hope they get that together soon.

The idea of using MicroPython is an interesting one that I might have to dig into more - the prospect of not having to rewrite the whole affair is very appealing... Interesting stuff, thanks for the tips.

One sort of runs into the problems of price and complexity in trying to make a standalone device that fits that description. A Raspberry Pi plus a preloaded SD card and a TashTalk hat could form a plug-and-play solution, but a Raspberry Pi is a full fledged computer and can do much more than...

I've been thinking about this project a lot over the past few days and I've come to the unfortunate conclusion that it doesn't make sense. The complexity of the task is such that it's too much for an 8-bit PIC, and if I move on up to a system like an ESP32, at that point, why not just implement...

Very interesting! Thanks for digging into this. I might be able to do this on a PIC, though it seems only marginally less complicated than implementing a router, heh. I guess the principal data structure is simpler, at least, which helps when you've got a very small amount of memory to work...

The bridge is going to have to have its own node address, at least on the LT side, isn't it? Otherwise, where do LT nodes send packets bound for different network numbers (and where do such packets come from when inbound?) It sort of sounds like the concept of a "bridge" requires the bridge to...

This is probably a long shot considering how rare MacCharlies are, but... I find myself curious about the keyboard unit that came with them. If it plugged into the Mac's keyboard port (the one with the 4P4C phone headset-type jack), it's one of a very small number of devices that did, and maybe...

MacvtapPort uses a different kind of network interface from a tap, a macvtap. Documentation on macvtaps is a bit scanty, but it's a sort of combination of a tap and a bridge. As for switching, it's just another method of getting EtherTalk connectivity, not necessarily better nor worse - if it...

128k/512k Serial Ports Later Mac Serial Ports PC Serial Ports Standard RS-422 RS-422 RS-232 Signalling Voltage Differential Differential Unbalanced Host Connector DE-9 Female miniDIN-8 Female DE-9 Male Handshaking Signals HSKi Only HSKi/HSKo DSR/DTR and RTS/CTS +5V and...

How does this logic sound: The bridge has a zone name and network number that can be manually configured. On startup it does a GNI to verify that they're valid if there's a router on the ET side of the network. If GNI response says they are, great. If the GNI response says the zone name is...

Interesting, I suppose I was thinking of a more complicated mapping logic, but perhaps it's not necessary. Thanks for the pictures! I suppose I should clarify that by "cloning the AsantéTalk" I didn't mean making a direct clone of existing hardware on which to run existing software, but...

That doesn't seem like much of a disadvantage. I'm having trouble visualizing how the bridge should resolve the difference between the nonextended (LocalTalk) and extended (EtherTalk) networks it sits between. Unlike a router, the bridge doesn't represent itself as a single node with addresses...

Thanks. =) It's a legitimate question that should be asked, though, why use the complicated solution when a simpler one works just as well. Routers give you zones, which are useful in organizing big internets, I know that much, but I doubt even the most dedicated enthusiasts on this forum are...

Well, that's what I'm asking myself, too.

By using a router that has a LocalTalk port. TashRouter supports this with TashTalk (and LToUDP), and the Shivas and GatorBoxes have LocalTalk ports as well.