Search results

I have a VST Zip module that used work flawlessly on both 190 and 5300ce. Now after several years of non use I had to fix a series of troubles, from vinegar syndrome to plastic case damages and hinges. Well, out of a complete collection of 190/5300 (190 bw, color, 5300 bw, vga and supervga, and...

Ok, thank you. I have indeed newer Macs but it would have been useful to setup this iMac G5 that I use only for statistics to also access the uni VPN

Its the university that uses FortiClientVPN. Cannot get to connect with the VPN built in on OS X 10.5 and no 68k FortiClient versions exist. So I was wondering if any 3rd part alternative do exist.

As per subject, is there any VPN client for 10.5?

FOLLOW UP This iMac had two power problems: 1) the power button on the back plate gone 2) the power switch on the logic board de soldered. I isolated the power button with insulated tape, re-soldered the switch and then soldered two wires from the brass pods (see pictures) and routed outside...

The iMac G5 has a power button on the back cover that shorts two pin located on a switch soldered to the logic board. The switch is broken and I can only power the iMac using the power pads.    Cannot get to locate this part in the market. Any hints?

repasted with MX4 and now it’s much cooler. I also tried to replace processors but this time I couldn’t get to calibrate these two. Luckily these two are paired to a good lobo, so in future, in case of failure, I will have to replace processors and logic. These are the temperatures just after...

i guess that it’s better and more fun to source the replacement polarizer and fix yourself

Are these temperatures in °C normal? The peaks are when Mail sends a message:

 I will, however they sell also 45° sheets. These are the last pictures of my 180c:

These are from a D800 (the one with antialias filter) with a macro lens. White balance sucks. I never imagined how difficult is to take pictures of LCDs:

Will try tomorrow with a proper camera, maybe it’s moire effect

I retook the picts, to me seems fine

Polarizer removal. Incidentally, what do you suggest to remove the old adhesive traces. I tried with isopropyl alcohol and also with xilole, but it’s very obstinate. this is how it appears: Film removal is indeed easy https://youtu.be/RmRi7rBLEmY

Follow up: 180c fixed. I bought both the adhesive and the non adhesive film. This is the first one, too many bubbles but will improve the technique. Next one will try with the non adhesive film. The correct orientation for PB 180c is 45°. This short video shows the effect of the polarizing...

I have just calibrated a G5 2.7 and a G5 2.0 after a 2.5 transplant. ASD says tads out of range or other amenities, but once booted off OS X both macs are quite and everything works as it should. In the past I kept running ASD and thermal calibrations over and over after reseating and swapping...

Incidentally, should ASD be rerun if I replace  the LCS with air? 

Folder icon maker, https://www.macintoshrepository.org/1888-folder-icon-maker-1-x

Ok, I managed to play with MacTCP and now Network Time works. Incidentally, are there any urls still viable just to see how Mosaic renders them? So far I cannot get to load anything.

I have the router from the company that provides IPs in the 168.x values and an airport that is set to provide 10.0.1.x, I tried to hook the PB100 to both using respectively 10.0.1.200 and 168.0.1.200. I can see the printer and other vintage macs in the same network but cannot get to get out...