Search results

Hi @craig1410, The Mouser basket is really helpfull here! Have you been able to fit Mouser (PDC, ADB, Serial and 25 pin D sockets) parts already?

Maybe something nice to share. These are the Conrad part numbers for ALL the capacitors on the Color Classic analog board, and i can confirm these will work and fit: Elektrolytische condensator Radiaal bedraad 7.5 mm 5600 µF 10 V 20 % (Ø x h) 16 mm x 25 mm Würth Elektronik 860010280025 1x 2x...

I my case it is just a unisolated metal plate.. The little hooks at the end of the plate that will stick into the PSU were bend and where touching some soldering point. It is quite thick metal, but due to taking the board in and out i thing it bend in a unlucky way. There are still some toasted...

I just got in the 2x4MB 30pin simms and the 16mhz FPU chip :) . Thanks all

Board Reference    Part CD3    10uF 16v    capacitor                    CF1    224 250v    poly capacitor                   N/A CF10    220uF 35v    electrolytic capacitor                   N/A CF11    470uF 35v    electrolytic capacitor                   N/A CF2    4.7uF 50v    electrolytic...

Hi all, I replaced all the caps again, just to be sure i did not make any mistake. Still nothing. So the caps can not be the problem (actually, We already knew, because I had remeasured them). During the re-assembly i noticed that the metal bottom place was bend a bit. Because i want to save...

@techknight: I checked the 2 traces; but the are oke..

@techknight -> It is the angle. I see what you mean by 'are not filled all the way', but that is the reflection of the new solder joints. The new solder joints are reflecting much more then the old ones. I will take some new pictures by day-light

Here are some high res photo's; I desoldered all the caps, and checks it with my ESR meter. They all give the right value. There are some (likely) cooked resistors, but when i check them, the give the right value as well.. http://van-de-lagemaat.com/recap/ It is a light chirp chirp chirp...

HI all, Because i had some small issue with my color classic's analog board (very little, but fibrating screen) i replaced all the capacitors.. (hell of a job, but, my little mac deserve this of course). But, after replacing all the caps, the mac doesn't start anymore. When i turned it on, i...