Search results

At this point I would check my termination power and verify my bluescsi with a different one. Also... make sure your formatting you sd card correctly (exfat or fat32) and see if you can put a blank hda in it and install to it from floppy (ive had bad sd's that wouldnt format correctly). If your...

Oh. And verify all your voltages are good coming from your analog board

If that's the case you either have a scsi issue or bluescsi issue. I haven't seen a bluescsi hardware issue (as of yet), but I've had a number of scsi issues. I take it you've done the diode mod for scsi termination since the bluescsi was working before. First thing I would do is try another...

I'd try reformatting the sd card and putting a fresh copy of your drive on it. I've had this happen to me a couple of times and this solved it (my bluescsi not booting that is)

This is a super cool project! I've been wanting to have some sort of kvm for a while for my different machines. It looks like you've got the 'K' part sussed. I'm definetly down for building one once your happy with the finished product. Thanks!!!

The built in self test you ran confirmed all is good.. it makes sure all the checksums are correct. You can use the other programs to test peripherals, but because they were written before 2e was a glimmer in apple's eyes the checksums weren't included. I'm not sure if there is a diagnostics...

Your machine is fine. Your using apple 2 plus software to test an apple 2e. It might run fine (that was apple's goal after all), but the rom checksums they used weren't the same.

The flyback is driven off of 12v (12f). There shouldn't be any difference between the 220v and the 110v analog board flyback. I would, however, verify the flybacks part #'s are the same. That or make sure the updated/different flyback is a compatible part for your analog board.

Flyback is definetly gonna need to be replaced. They crack like that when the internal windings short. You can test it with a ringer(lopt tester), but I'm 99% sure it's done. If it's the 1% your gonna have to fill the crack with hv putty and find you another flyback because it's not gonna last...

If you pull the card your going to have to come up with a processor for the iix (if you intend to sell it too). It looks like they pulled the processor to install that card (the pcb your card plugs into goes directly into the processor socket). As for the video - as long as you have a a mac to...

You could always get a boot disk off ebay or a local seller for cheap (if your local to me id give you one). Saying that since it hasn't been recapped/cleaned your best bet would be a floppy emu or a bluescsi (or Zuluacsi) . These are all newer tools that emulate older hardware and are the...

One little 5v short slowed me down, but 2 plcc's removed and replaced... One IIci rebuild up and running! Chuffed!

That looks a lot better!!! All we need to resolve is horizontal width at this point. I know the mod talks about adjusting the Horz deflection voltage as part of the mod. If you raise or lower the monitors b+ volltage this can cause the monitor to adjust In Size, but yur picture looks good.if...

It looks like your pincushion settings are out of whack. Did you try adjusting the horizontal bow potentiometer(pb)

Interested in one if your doing a re-run!

If you had the install media you could always format the drives are re-install the os. I'll be in Austin on Thursday. What are you looking to get for the g4?

The power supply is built into the analog board. Not sure what mods have been done to the machine considering it has a powerpc board in it (from previous posts). The cc analog doesn't support 640 without mods. Wondering if it might be better to get a 575 analog and do the mod to fit it (since...

Lol! Welcome to the club!