Search results

Hello All, Hoping to get some help with the internal speaker not working. I was testing a logic board that I recently bought as an extra to have on hand. So I swapped it into my color classic and bent a pin on the chassis connector due to a bent pin on the logic board. Long story short, I had...

So got a replacement classic board in. Everything on it works great, however, when I plug in a ram expansion card (with 2x1mb sims installed) I get a sad Mac. Unplug the expansion card, boots with no issue. What I’ve tried so far: - Unplugged additional sims and change the jumper to no simms...

Hello, A while back I partially recapped the analog board of my Macintosh Classic. I got the typical suspects replaced. I remember it working fine, but when I turned it on today, the screen is smaller at the top and bigger at the bottom. If you wait for the computer to warm up, it eventually...

Title pretty much says it all, I’m hoping to see if there is some kind of replacement for the RJ11 style phone jack that connects to the keyboard. I’m having issues getting my keyboard to work. I have already replaced the coiled cord itself and reflowed the solder joints on the keyboard / jack...

I did a re-cap of the analog board on my Classic II as it was having some power issues with a wavy like screen (you could see a ripple roll down the monitor slowly). Replaced all radial electrolytic capacitors, put it back in the Mac and still having issues with it. Worth noting I am testing...

So I just recapped a Macintosh LC 1 and everything was going okay. First time for me recapping a vintage mac. Turned it on after recapping it got a startup chime, then next thing you know the cap pops then about an inch tall flame. Quickly blew it out, desoldered it, cleaned it up, and no damage...

I just picked up a week ago a Power Mac 5400 AIO system. I’ve been playing around with it some, and it works perfectly except for one thing I’ve noticed. When adjusting brightness and contrast, very feint slow scrolling lines will appear. It only happens when adjusting the monitor controls, and...

I picked up an Apple g4 studio display today. One of those where the entire back is clear and sits on a swirled acrylic stand. Got it home and plugged it into my Powermac g4 and works fine. However that's when I noticed that the front of the screen looks scratched, and becomes quite distracting...