Search results

I saw this in the Ebay Finds thread: And yes, that is a very cool feature.  My first Asante card did not have this so here is the MacGruber I needed to do to run the Asante with a video card: I made the back plane out of an old PC case sheet metal with some Dremel work. The card is rotated...

It looks like my photo of my shipping box did not make it through the interwebs into this post...Allmacs is in SC.

I was in the same boat...I'd love to be able to do this however I do not have the skills needed. SO far so good on the IIsi. On my list this weekend is to check out the SE/30...I will post when it is up and runing.

While I would love to have that skill, I do not and I am not up for practicing on my only board.

Hi All, I had Ebay seller AllMacs recap both my IIsi board and one of my SE/30 boards. I have bee using the board in the WtM configuration for a few days without issue.  Prior to the recap I got this scary image on screen and decided it was time to get on with the recap... Here is a shot of...

Very cool. Is the jumper so that you can assign the slot used like the Asante models? Any plans for a PDS pass-through on top?

I just tried with this thread:  I was hoping some of missing content would appear however that was not the case...  

2 SE/30's IIsi PowerBook G3 WallStreet (I think) QuickSilver G4

Indeed, I did mean -11.98. Seems I can't edit a post after someone has submitted a replay so my error will live on...

My Seasonic unit that @superjer2000 has arrived and I fiddled with this and got it working today.  I started by pulling wires from ATX connector using the staple trick to get the molex pin out: All pins were removed with this method so I didn't need to crimp any new pins. After getting the...

Is that a clear SE/30?

The clear ones are fantastic.

The drive sled that my first SE/30 came with was red, yet I have another with a green led and 2 other sleds without an led at all. So what was the stock color LED in the SE/30? 

@superjer2000 do you recall if the fan was sucking air through the vents in the Seasonic case and blowing out the back or sucking air in the back of the case and blowing it through the case and out the vents? I am guessing the former.

I found this helpful link with the detail: Pinouts    20 Pin ATX Connector 10 Pin SE Power Connector -12V 6 1 GND...

That feature was one of the reasons I decided to try this unit.  I looked for more detail on the Seasonic site however I could not find anything to download.  I'll need to be patient until it arrives. Still looking for a mapping of stock SE/30 PSU wires to their needed voltages if anyone has...

Here you go: https://www.newegg.com/Product/Product.aspx?Item=N82E16817151211

OK, I am in.  I just ordered one of these from NewEgg.com for just under $50 shipped to deal with my leaky PSU. It will arrive early next week and this should be a fun project. Does anyone have a diagram that maps the colored wires from the original PSU to their needed voltages? Here is what I...

You have my attention. When you get around to doing the install, I'd love to see your specific PSU used and your install steps.

Hi All, One of my SE/30s is getting its motherboard recapped and this is what is PSU looks like with leaky goo: The machine has a new old stock analog board and will have the following when completed: Micron Video card with grayscale adaptere Daystar 50 mhz accelerator that goes plugs...