Search results

I don't know if Mac OS 9 support that, but a graphic card with a DVI Dual Link output is OK for 2560x1440 and many display can use this mode. With VGA? it's complicated, it depend from the RAMdac speed and many display cannot display in analog at native definition. But there is a (big) problem...

It's not a good idea on the Power Mac 6100 : the x86 is on top of the PowerPC 601. If you install a fan on the x86 CPU, the heat from the x86 goes direct to the PowerPC, and after go the top of the card... on the x86 CPU. Nope. The x86 on the ODS card is a 486 DX2 (5 V) and you can replace it...

I have tested with a USB to DE9 and DE9 to Mini DIN without problem (http://www.journaldulapin.com/2014/09/23/faire-fonctionner-une-imprimante-imagewriter-ii-sous-mac-os-x/). You can find USB to Mini DIN, but there is many problems with drivers on modern Mac OS X. For the parameters : 9600...

USB to FireWire will not work. It's just "scam" : it works only with peripheral who can send a USB signal on FireWire connector (very very rare). But on a modern Mac with Thunderbolt, you can use Thunderbolt to Firewire and use the first iPod without problem.

Actually, i use a riser found on Amazon. The size is OK (the height), but it's misaligned with the fat back. The Apple dual PCI riser is OK for that : the PCI connector is shifted. I have a photo (from up) : The first is too short and the card will not fit, because there is the hard drive...

The 820-0689-A are too short in the TAM, i have tested.

Hi, i have a question : i have a TAM but i have note the PCI riser.  I search the reference (and the size) frome the original PCI riser for the TAM. I have tried with a "noname" model, but i can't close the TAM with the fat back, and the dual PCI riser from a Power Mac has not the right size. 

Hi, i have a question : i have a TAM but i have note the PCI riser.  I search the reference (and the size) frome the original PCI riser for the TAM. I have tried with a "noname" model, but i can't close the TAM with the fat back, and the dual PCI riser from a Power Mac has not the right size. 

It works with the internal drive too, if you have 3.5 inches floppy with ProDOS on it. And i have tested the FloppyEmu with ".po" image (800 kB) without problem.

Many things, but a specific graphic card : a GXT2000P GPU from a RS/6000 IBM workstation (a machine with OpenFirmware). And... the card works in a Power Mac G3. But there is no driver : Mac OS 9 see a display card, but i have only the white screen boot from the OpenFirmware.

I have a mouse like that. And i have the Bandai Pippin Pad, too : there is a trackball on it, with two button. I think that the trackball from PowerBook 180 use two different button, too.

Received today : a wireless (infrared) gamepad for my Pippin and two games.

This week, i have buy a PowerBook 1400, without information (just, it works). And good suprise : there is a G3 333 inside the Mac, and 48 MB RAM. And a HP deskjet 340 with the serial cable (not tested yet).

Today : a new battery for my LC III and a 256k VRAM SIMM (and a 32 MB RAM SIMM from my stock) Now, he has a FPU, an Ethernet card, 36 MB RAM and 768 KB video RAM.

It's a TiBook 400. I have another one on my collection, but the FireWire chip is dead, and it's a pain to boot Mac OS 9 (i must delete the FireWire extension...) And i'm waiting for a wireless gamepad for Pippin !

Today, i have found many things. A PowerBook 100 and  a Mac Classic recapped by bibilit A PowerBook G4 (the first model) And many SCSI things (hard drive, CD-ROM, connector) and RAM (many EDO) Next step : test the RAM.

Today : i have try to print with the Apple Pippin and a StyleWriter 2400. I have a problem with colors, but it works with the black cartdrige ! 

Hi,  Since many years, i read this forum. Today, i try to share my finds. This week, i have found a ZIP 100 SCSI (not a Plus), a StyleWriter 2400 to use with my Apple Bandai Pippin, many (many) RAM SIMM and DIMM, an ExpressCard SSD (48 GB, for old MacBook Pro), a Centris 660/AV with CD-ROM (a...

I think i can dump the 1.2 ROM, but i'm not sure. With Pease and my Apple Talk network, i suppose i can launch the tool and save the ROM (but it's very slow with Apple Talk)

Hi,  i have uploaded a corrected version (4 MB, this time). Thank's Blitter ! http://down.dandu.be/ROM13 And i have found a MO230 drive (internal), but there is a problem with my media. I'm waiting for a second...