Search results

Dear all, Thank you very much for your contributions. Since the board has already a substantial amount of damage and I already have lost a couple of solder pads while removing the factory caps back then, I would rather give it to someone who is experienced with that and already owns all the...

Here is a photo of the symptom:

It is as suggested by the mentioned Japanese SE/30 repair page: "(5) If solution (4) doesn't work, pull up the sound IC chip (UB11). You can see letters "SONY 0F09G 3430045B APPLE85" or "SONY 9A04 3430045B APPLE85" printed on the chip. To pull up the IC chip, connect pin 7 to pin 15 of the chip...

Ah yes, there is at least one wire going to the back side of the board since needing connection to J12.

To be honest, I don't remember whether the board has been cleaned (well, obviously - not :(). Besides that "rotting" had already been made quite some progress when I started recapping back then, AFAIR. Sadly, I did not go for ceramic capacitors back then :rolleyes: There are a couple of ICs of...

Dear all, it must have been around 2011 that I started recapping my SE/30. I don't know why I did that in the first place, whether because recapping is a good thing anyway, I discovered capacitor leakage or the Mac had already stopped working back then. There is already an ancient thread...

Yes, I also tried booting with extensions disabled.

There was nothing to see so far but nevertheless I already exchanged the 4 (bigger, cylindric) caps.

Hello everyone, I have a SCSI ethernet box Asanté EN/SC which worked fine for many years but then stopped working suddenly. The symptoms are: no matter which application I try to communicate with the EN/SC, the respective app hangs (thus the whole system). What I tried is: - Asanté...

Here we go again, today I finished the repair, but now I got the "A Bright Horizontal Line in the Black Monitor"-symptom. The HD starts, I hear some knicking out of the speaker but only the bright line appears. As of the suggested solutions here...

Hi there, I am currently recapping a SE/30. Unfortunately, some solder pads (and their environment) are completely gone away due to the leaked capacitors. So I need to know where the caps C10, C9 and C6 can be connected alternatively. As I am surely not the first one with this problem, I...