Search results

CORRECTION /Volumes/YOURVOLUME/YOUROS9SYSTEMFOLDER I forgot the / before Volumes

Nope, you must install a new copy of 7.6 in Finnish (MacOS76_WW.ZIP) then update to 7.6.1 with the updater (MacOS761_WW.ZIP)

Go to Macintosh Garden, search "Mac OS 7.6.x" and pick up the "MacOS761_WW.ZIP" file

SOLVED So, a user into MacOS9Lives' Facebook group pasted me a terminal line: /usr/sbin/bless --folder9 "Volumes/YOURVOLUME/YOUROS9SYSTEMFOLDER" -saveX --use9 --setOF /usr/sbin/bless --folder9 "Volumes/YOURVOLUME/YOUROS9SYSTEMFOLDER" -saveX --use9 --setOF; /sbin/reboot ^------- If you want...

Yep, I posted the issue in OS9Lives' Facebook group but no luck, another person had my same problem and frustration but without solution

Hi everybody! Yesterday I installed Mac OS 9.2.2 on my “Unsupported” eMac G4 (1 GhZ, 40 GB, 1 GB, ATI 7500) with the MacOS9Lives disc on the second partition of my hard disk and 10.4.11 on the first partition. OS 9.2.2 works like a charm on my eMac G4 and I really want to keep it with 10.4.11...

How do you attached the IDE drive to the SCSI controller? Is that board an IDE to SCSI?

;)

All the mothern ATX PSUs have 4 pin square connectors called "P4", maybe you can search on eBay or Aliexpress and see what matches with the molex connector with your LC, or maybe you can do a very dirty thing: remove the pins from an ATX connector (I think the pins from the 20 pin plug are the...

UPDATE 16/6/2018 I had an ASTEC PSU on my LC, not a TDK one. However, I changed these caps and... no more fish smell! Now my LC is "usable" :')

Using an Arduino as SCSI device would be a beautiful thing, however, SCSI2SD has a Cortex M3 based microcontroller, the only Arduino with M3 is the "Due" model.

Unfortunately you can't downgrade the firmware, put OS 9.2.2 which is more stable than 8.6

I use my IIci with an ATX PSU, I manually power it by shorting PS_ON and a GND rocker switch, never had an issue, I use it also with IIsi and I used it on the Q700

Hi everybody! :) I want to pick up an iMac G3 350/400 MhZ board to adapt it in an ATX case, does someone have a diagram for attaching an ATX PSU to the G3's mobo? Can I get the video directly from the external VGA port? Thank you :)

I know, my SCSI2SD v5 board has 100ohm resistor packs. However, I'll hope that they'll release the v5 board's sources in future (It's an improbable thing, but dreaming is costless)

At the moment I gave up and stored the compiled source everything in my HDDs, cloning this board is too expensive, especially for the 5LP and the 110 ohm resistors that costs an eye here in Italy. When I'll want to burn money I'll clone it, at the moment I want to build DA15-VGA adaptors for my...

I need to do them for SCSI2SD (SIP-10 bussed resistors cost a lot here in Italy) but I need 100 ohm for recreating the 4610X-101-101LF, I need only to put 100 omh resistors in each pin? (except the first, obviously)

I was asking myself the same thing, the 5LP costs about an eye for a single piece, but this would imply software and PCB adapting

You're welcome, man :)

There are two pins on the IIsi for choosing beetween onboard ROM and SIMM ROM, if you short these the IIsi will boot from the SIMM ROM