Search results

get this 75 bucks for a 867 mhz quicksilver with 768 meg ram the case was fantastic the videocard turned out to be a geforce 3 and inside i fine an atto ul3d scsi card and seagte hard drive and an adaptec 2930cu [8D]

it is a lime 366 cd with usb and fire wire i have os 10.4 on cd and dvd both

how do i get my clamshell to run os 10.4? i have 576 meg of memory and airport working but 10.4 would be great. [:P] ]'>

the dlink quit me see other posts. i thought i had a bad airport card but i rescued a linksys router with a wireless usb adapter I am hooking up my printer now good by dlink

my b&w has a 700 mhz g4 and a radion 9200 pci, it is running 10.4.11 and it is ok and still used daily by my wife for storing "her pictures". it surfs the web etc ps up the memory to 1 or 2 gig max it out

the dlink is bad what would be a good recomendation for my ibook wireless and g4 qicksilver, cube, blue and white wired

good news the problem is not my airport card. :b&w: I am posting from it right now! so the problem is my dlink router. I wonder what is wrong with it well i will deal wth that latter I am very pleased right now!! [:P] ]'>

the card is manufactued by Double H their web site states that the card will work with win 98se 200 and xp mac os 8.6.1 greater after further testing! with the card installed I installed 9.1 on a second partition. i switched the devices to the bottom ports and it now shows up in the system...

i have a sonnet 700 mhz running 10.4. The only problem i have is no dvd rom in the b&w and it will not boot off of fire wire. lucky for me i got a set os 10.4 cd's from apple. this has helped with several project machines. I also have my 5 machine family pack in dvd. i dont want to be...

the apple system profile shows the usb card with 4 ports 1.5.5 usb bus 0 yet I have installed a mouse and a modem and they bo not show up is shows nothing connected i have tried the restart etc. nothing. The optical mouse does not even power the led does any one have a card recommendation

that is correct nothing at all this sucks the card must be bad

i am with you at first i thought that panel was spot welded into place but it is removable thanks

i have looked for a plate and found none. The drives are in a box (open top) that rotates over to access the mobo. there are a set of holes for air flow on the left what could be opened up nicley to access the pci slots. the existing cable routes between the side of this box and the power...

yes i got the at in the menu bar grayed out. i know it is not connected it acts like is is trying to connect and then sayed that it can not connect my dlink does not show up in thew list of networks should it be set to any thing special?

will any usb pci card work? michael

yes i went in and made sue the airport was selected and even turned off all the security on my dlink router. nothing . how can you tell if the airport card is working?

great info i am looking for the atto card. although routing the scsi cable in the 7600 case will be a challenge cut and hack i suppose?

well i am online and writing this posting with the lime clamshell we have 10.4 running and not enough ram at 192 meg [:)] ]'>

7600 with a g3 / 400 os mac 9.2.2 with old world support 1.0.1

i have the lime ibook running but it will not connect to my dlink 2310. 1 even turned off the security for a while? how do you know the airport card is working? i have went through the setting nothing helps?