Search results

Before the recent posts on the prior thread were lost, Saybur promised the version 2.1 board would incorporate an 68040 class accelerator and, if the ATXmega you select has enough RAM, some limited ability to travel through time. So not a bad idea to wait!

I haven't really used KiCad either (other than for following Scuznet schematics when troubleshooting). If I had more time, I would press ahead with exactly what you're proposing (similar to what I had proposed before "the event" - a Scuznet with a 2.5" HD footprint and ideally a header that...

For some additional upside, the hang I was getting at shutdown when just running a TCP app without an AppleShare volume mounted seems to be gone as well.

I added a new branch for the Daynaport emulation at https://github.com/superjer2000/scuznet/tree/Daynaport---Multipacket If anybody else can test, I'd appreciate it. As noted previously, I am getting about 75k/s on my SE/30 and about 100k/s on my PB145b with AppleShare, and about the same with...

For clarity, this question is in relation to disk performance, not network performance.

One other point for project documentation - As noted I've been working to optimize the Daynaport emulation and have been able to make some pretty significant improvements on AppleTalk performance. * I had made my original changes on the scuznet.ini version of the base firmware (the version...

Rewind my prior comment on me running FTP on Debian. It's amazing how all of these various projects start to blend into one big blob in my mind after a while. That was my prior setup when I had my netatalk server running on a raspberry pi. IIRC, the default FTP daemon with Debian only...

You are getting 100k+ on Appletalk but only 30k on FTP? That is really weird. From the work I have done, FTP has almost always been faster - I assumed due to less overhead for tcp than appletalk. Are you running OpenTransport? While I am getting about 76kbs on appletalk on my SE30 now I am...

My installer seems to be 7.7.2. The Scsilink software that gets installed is 1.2.5 (when the installer is opened)

That is odd. I’m not sure what truly terrible means but you should expect at least 75kbs on your IIci using the original Daynaport firmware I had added. I did notice that something seems to get installed that hampers performance if you do a full install of system software for any Mac (including...

Hi Saybur, was the bug (and the prior note that forcefast wasn't doing anything), introduced with these recent changes? The codebase I'm working off of was from around June 29th and everything seems stable and disk performance with forcefast seems pretty snappy.

I'm actually running a big of an amalgam of the newer disk code and the older networking code as it seemed to work fine for my purposes and I didn't have to revise things that dramatically. Attached is an compiled version of the firmware (for the 64A3U V01 board) if anybody wants to give it a...

I exaggerated a bit on my 145B results. Well over = 102kB/s. So the new firmware is getting: SE/30 AppleShare 75kB/S Fetch: 86kb/S PowerBook 145B AppleShare 102kb/s Fetch about 91kB/s and continuing to climb but really slowly. All times above are writing to the Scuznet disk (FAT32 but with...

Actually - I can wrap my mind around it. I've been working on changing how Scuznet-Daynaport handles packets and am up to ~74kB/s on AppleTalk on my SE/30. I tested my PB 145B though with the same Firmware and got well over 100kB/s so there is a pretty significant difference between 030...

@Chopsticks This is similar to what I noted and reported on github. I did a small 6MB AppleShare transfer which worked OK with reasonable speed (~65kB/s) but a Fetch transfer froze up very fast and was super slow to ramp up. No issue with hard drive performance for me though. @saybur how are...

Thanks - I think that is going to be at least part of my issue as well. I started playing with the firmware a bit to put in other debug points to see where things aren't working, starting with the SD card.  The board is failing to initialize after its 250 tries which prompted me to download...

@Chopsticks  thanks for all this. I’ve started  with the logging process and have put in some of my own debugging  messages to help figure out what’s happening. I’ll report back once I have a better idea what is happening. 

This is super cool!!!!!  For wire shark do you just define how various packets look based on the Includes bytes and then it parses out the packets like this?  I had no idea Wireshark could do this. 

Last question - where did you get your PCBs? I'm assuming it's not the case but there could be an issue with the PCB.  I got mine from  @switch998 was kind enough to print and mail out the extras- it looks like he got his assembled - @switch998 did your board(s) end up working without issue...

Thanks. I’ll give this a try although when I was playing around with it yesterday it seemed like I wasn’t getting any network activity (even over tcp) unless AppleTalk was  turned on over Ethernet.  Now that was on my SE30 that had an internal nic so ,habe there was an issue there.     in an...