Search results

There appears to be quite a market here for CRT/video parts, but I can see your point that the practice of removing specific parts for one client would be very cost prohibitive for an electronic vendor (possible massive group buy?)  ;-)   Anyway, the search goes on. 

Here's the email:  "Just selling any part of a monitor case isn’t likely going to happen. We can’t recycle them without a case." Doesn't make any sense to me. Are the recycling laws in Denver that strict? 

I reached out to the Apple Rescue of Denver which has several M1297 and M0401 monitors listed on their site. Apparently they cannot sell the bezel separately as the case needs to be intact to recycle the monitor. I'm not criticizing their policy as I am totally oblivious to U.S. law, but can...

The Quadra has been dormant for sometime so I don't have a proper diagnosis to offer. I recall wanting to test out another HD to see if I could replicate the issue but I never bothered. If I get to it I'll update the thread. 

No. The monitor you gave me was the Macintosh Color Display. I received the RGB monitor during my Quadra 950 conquest, which is well-documented in this thread. Unfortunately, the front bezel was damaged while cleaning my workstation, and I'm still on the lookout for a replacement. Of course, I...

Yep, along with the Macintosh Color Display. I don't know what I'm going to do with my high-res RGB monitor. 

I've got an ADC to VGA adapter, and another adapter for VGA to DB-15. The NuBus card works fine with my Lacie Electron Blue IV.  That's why I still have this old junk. How's your Portrait Display holding up? 

Just wondering if anyone has successfully connected an ADC-type monitor to a Mac II with the high-res Apple NuBus video card. 

The chassis is now removed from the front bezel. The only problem I incurred while carefully lifting the chassis was the CRT board separated from the neck of the CRT. So now the pins from the picture tube are no longer connected to the CRT board. I doubt I damaged the picture tube as I did not...

I just want to know if I can pull up the CRT assembly off the front bezel in one piece 

The service manual is written to take everything part piece by piece. I don't want to do that as I want to avoid touching the high voltage stuff. 

Hi Everyone, I had an unfortunate accident with my M1297 monitor early last year. I was cleaning my workstation when one of the legs on my desk buckled causing the monitor to fall. While the CRT and its internals were undamaged, a small part of the front bezel broke off on the bottom left...

Good to see that this thread was revived. I've been busy with other things, so I'll provide a detailed update soon. Here are the fine points in the meantime: (1) I sold the Quadra 950 tower (just the case; no electronics) and the WGS 95 bezel as they were very scratched up/broken in certain...

I'm selling a carrying bag on the Trading Post. It's nearly twice the size of the original Apple carrying bag. 

The original Macintosh manual has the same "advice" as well. I guess you could run these Macs as night-lights with a proper screen-saver. It's still not as bad as my Chrysler service manual, which says my Ultradrive can use Dextron additives if Mopar ATF is not available. 

I realize I'm in the minority, but the Rodime drive in my Rodime 20 Plus is still going strong; same with the drive in my HD20. Of course, like anything 30+ years old, these things are on heavily borrowed time. Most of my Quantum drives have turned sour in the last year due to age.  The award...

I do have an A/UX drive for a IIci, but recently I've been receiving the message: macgetty is not executable; launching getty instead, and then it asks for a login prompt. The drive was partitioned to run 7.0.1 and A/UX 3.The HD is on its way out (Quantum Pro-Drive with a loud worn-bearing...

If I do cast off anything, it'll likely be just the case from the 950. Where are you located? 

Yes, both cases are identical. Front bezels, etc. are swappable. 

He's gone, don't worry.