Search results

I've had the wildly blown version once so I didn't think that was the issue - I think I still have these caps so I'll try this. Thx!

Hi I have a common Asante MacCon Ethernet card that came in an SE/30 originally stacked on top of a Diimo. The Diimo is missing two caps but when I plug the card into the PDS slot (the logic board was just recapped by me) - the entire machine just clips, clicks and won't power on anything...

This one goes w the Novy btw not the Gemini which will require the PSU w the same connector.

Well this one is where the 030 board gets plugged in - the board into this fan unit - then this gets plugged in presumably from the vacant connector w the one pin a bit wider than the rest. Do you see the connector now here (not the one w a cord plugged in)? It's the same kind as the psu we've...

Well one pin is farther off the side - it's ab the width of molex with on offset pin

Here it is - I haven't turned it on yet - but what a mess underneath this thing. The crystal is rated at 80MHZ fwiw.

Thanks for the tip! Btw - what's the cable called that runs off the Meanwell? It's the same 4-pin connector on my fan pictured above w one of the pins set off to one side...

Yes fortunately the card is okay - the Plus really gave me a light show though.

Full disclosure - i tinkered w running power from CRx and started a moderate electrical fire inside my Plus. I have a different problem now :) I'm in timeout until I can find a manual.

Ah it appears cr24 and cr25 are options.

I have one w a fan too. Im missing the powercord for it - but it also has to clip In...

Hi I have a couple of 030 Mac Plus accelerators and both hAve a way to grab extra power via red and black clips that I recall clip on to a resistor on the power sweep board. Does anyone know which resistor you can do this with? I just can't find a manual around this task.

But wasn't the neighbor shielding function kind of Wow - looks like I need to reshield a whole bunch of Max IIS and IIFXs :)

But wasn't the neighbor shielding function kind of debunked?

Scratch that the shielding is there - I do think it's related to these two shields under each boards given ifs propensity to fail when they'd be closest to them.

Thanks all - lots to try here - I did wonder about the metal shielding under the analog board. I removed the shield under the LB. What's really the point of the shielding functionally? I'm going to nail the connectors on both.

I'll happily let someone study, copy, clone this one - who is qualified? Cough (Bolle), cough, cough.

Looking at it again - it's absolutely an 030 - somewhat less exciting - but interesting given the general lack of Iifx accelerator options. I'll post detailed pics when it arrives.

Ah okay - makes sense. It just looks like an 040 to me given the coloring. The docs suggest it runs at 55mhz... I'll post detailed pics when it arrives.

I've never seen one - but i will acknowledge that i overpaid for the card inside on Buyee. All the references I see on Iifx upgrades have to do w overclocking the 030 - so I'm not totally sure what I'm looking at. The screen pic on the sale page reflects the original processor - which may just...