Search results

Over the weekend I tried a soldering holder clip but way too flimsy. I think the only thing to get it truly non puffed at the crack is to lay a heavy barbell on it while it cures.

How could I keep the cracked pieces level while the glue is curing?

The PowerBook 1400c lids are notorious for cracking at the hinge as you can see due to the screws on the underside. Is there a way to recreate or fix these? I was trying to redraw on CAD but my skills are not that good. Would 3D scanning be possible? If there is a solid way to remake these and...

For some reason I never saw the last couple of replies to this thread as they stopped going to my email. I found some on buyee.jp and they work!

One reason I was wondering about mb modified with an onboard grayscale fpga is the Carrera040 Info /Hacking Thread: I wonder @Bolle are these problems with xceed not being compatible with an 040 related to the Carrera not compatible with the VRAM? If these are related, then it seems like it...

Would it be unrealistic to try for an SE/30 motherboard "interpretation" that includes a micron grayscale fpga built in? I believe someone in a 2017 post somewhere said they were close to recreate an SE/30 motherboard, which would have the potential to draw much less power and would be clean...

third party I believe.

I have the 16mb original to the motherboard. I'm hoping to change this specific ram card to 24mb up from 16mb by soldering on extra chips.

I have a 16mb ram module for the 1400c and I cannot find any 24mb ram modules. Would it be possible to add the 4 needed chips and some kind of connection at C3 to change 16mb to 24mb? It looks like there are some online warehouses that have KM48C2100BS-L6 chips.

I removed all the solder from the pads and now it works with either a DiiMo 030 or Turbo 040 but not a Carrera. I wonder if the Carrera specifically needs an on board processor?

I like having a minimalistic book cover for mine. I've attached it, the dimensions should be correct. It is on A4 paper.

That video was beautiful i'll have to try my hand at that. I also watched a video on using hot air and solderpaste which looks like it would work well.

I must have done something wrong while desoldering because now the diimo 030 does not work with the processor removed...maybe i need to wick all the joints?

I have a IIci that has been recapped but does not work without a Diimo 50mHz accelerator. However, I want to put a carrera in it. An 040 accelerator won't work because it needs the original 030 to initially boot I believe. So...I took of the 68030FE25B processor and ordered a 68030FE33C...

For the SE/30 I have to use the power supply but for the IIci it runs off the bus. Does this go for anyone else with v5 SCSI2SD?

I think mini vMac is your best bet, this emulates a Plus. However to program in assembly you might want to use text wrangler in Mac OS X   This site is good for explaining how to disasemble 68k programs and identify TRAP functions http://www.gryphel.com/c/minivmac/extras/fdisasm/ Attached are...

This is a great thread. Were you able to get the DougG3 ROM to work with the Turbo 040? I've been trying to learn 68k assembly to little avail, it seems like the Turbo ROM references against the gestalt ID on the motherboard ROM if that has anything to do with it? I have a new 68040RC40A that...

For the Rominator-I, I have a Mac Plus; I was wondering if there is a way to move the rominator elsewhere in the case. Is there such a thing as a 28 pin DIP cable to DIP socket?

I have a Mac Plus with a Graphics card that clips directly on the processor. I have been trying to get it to work for quite some time. Unfortunately the card comes with no markings. However, the processor is a 24-bit TI TMS34061FNL that looks like some RasterOps graphics cards might have used...