• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Search results

  1. EtherRad

    Macintosh SE/30 logicboard recreation (thread revival)

    Great I'll send pm. thanks!
  2. EtherRad

    Macintosh SE/30 logicboard recreation (thread revival)

    Are there any leftover boards you're willing to sell?
  3. EtherRad

    G4 cube heatsink for dual

    The 3d printed plastic versions arrived last night. There are millimeter measurement differences on some of the regions that I will need to adjust. All of the screw holes seem small. I was able to force fit the screws in. Is this typical for 3d printed parts or should I widen up the screw holes...
  4. EtherRad

    G4 cube heatsink for dual

    Great idea, it should be a quick fix for me to add more fins!
  5. EtherRad

    G4 cube heatsink for dual

    I drafted a prototype G4 cube heatsink for dual boards. I went ahead and sent it to JLC to make a plastic prototype to test fit and screws. If anyone has a dual and wants to try fit on their boards let me know and I will send the f3d/step etc or w.e files so you can edit the cpu contact stage...
  6. EtherRad

    iPrint?

    iPrint?
    • EtherRad
    • Profile post comment
  7. EtherRad

    Floppy Emu reloaded

    Amazing!
  8. EtherRad

    PowerMac 9600 Fan plug

    Sendcutsend customer service said that in general their different sheet metal products were conductive enough for a low power computer fan, but they couldn't really tell me what the best material was unfortunately. I didn't realize the blue steel would lose color but I believe it has been heat...
  9. EtherRad

    PowerMac 9600 Fan plug

    Here's the dxf! Xometry has so much more options, but the minimum price is a bit higher. I'm thinking of testing their anodized copper 101. ( https://www.xometry.com/materials/ ), they can get it down to 0.5mm. I have some blue steel parts from sendcutsend that are 0.15mm; that induction heater...
  10. EtherRad

    PowerMac 9600 Fan plug

    I've gone through several revisions over the past year to make a connector through the sendcutsend website for the 9600 case fan. This seems to work decent in terms of shape, but the thinnest cold rolled steel is 0.8 mm which is still super thick and cumbersome. CRS is the easiest to bend. Since...
  11. EtherRad

    PM9600: No video out

    Was there ever any luck for a bug fix on the 9200 ROM? Would any of these new ROM parsers help identify the issue?
  12. EtherRad

    Design68: A 65% replacement keyboard using AppleDesign controllers

    is there a way to get the controller from somewhere if I don't have a spare AEK? This looks really nice.
  13. EtherRad

    168-pin 5V schematics

    Yes sounds good I'll send you a PM!
  14. EtherRad

    168-pin 5V schematics

    Since 168-pin 5V ram is so scarce, and usually only found as FPM, I have received some KM44C16104BK-4 chips that should work great for the PowerMac 9600. I have one stick of 128MB FPM ram that I would have to sacrifice to trace the schematics but I would prefer not to do that if anyone happens...
  15. EtherRad

    Any SE/30 reloaded group buys going on?

    That group buy has already occurred
  16. EtherRad

    Any SE/30 reloaded group buys going on?

    I would be willing to add to the order to buy 1 or 2 boards if this helps get a group buy going
  17. EtherRad

    Building an internal grayscale card for the SE/30

    Fifth!
  18. EtherRad

    Do any G4 ZIF upgrades run @ 100Mhz bus?

    Hello, Just wanted to provide an update on the ZIF G4 1GHz. I received a response from one of the original lattice engineers: "Wow definitely some old devices, I remember specifying this family back in 1998 😊 Thoughts: Have attached the datasheet of the relevant device family. That and more...
  19. EtherRad

    LCD Monitors for matching Apple design

    It can be fun to finally see a design at the end. Then when any small change needs to be made it gets really frustrating. I wonder how people tolerate the software as a fulltime job but I guess they've had professional training courses and know the right way to do it. I gave up on redoing the...
  20. EtherRad

    LCD Monitors for matching Apple design

    Do those cards run on 60Hz?
Back
Top