Search results

-12V is not used by SE/30 itself, it is just passed through PDS slow or expansion board (if needed), btw, -8V is odd. Do you have a spare logic board, from any other SE or SE/30, that you can put in and test ? just to be sure that the issue resides on analog board. (Also analog board and PSU...

Hi everyone, after replacing the amplifier chip no luck, that I removed the Apple sound chip, cleaned the pads and the chip, re-soldered it... and YES, everything is ok now! crystal clear sound ! Thank you all

I think I found the issue, it should be the the audio amplifier 34119 I removed it and the traces are quite messy can be fixed. I have already ordered the IC, let see next week.

Hi, I just recapped the power supply too and now machine boots untethered, I have also installed additional VRAM in order to support VGA resolution. Everything works, but now I have very low or no sound, should I try to reflow the sound chip ?

Hi everyone, sorry for the late, I finally recapped the entire logic board, it took a while to obtain all the new tantalium caps. Now the chime sound is mych better, crystal clear, attached floppy Emu and it s reading it. I cannot connect a display right now but I should be able in the coming...

I’m not worrying about. Just wondering they are meant for

Update, all caps removed and some new one has been already installed. I'm waiting for the 10uF / 16V, hope to get these by Tuesday. I think the Egret works fine as I could barely hear the chime at startup and, triggering interrupt by Command-Power on keyboard, I can hear also listen at the death...

Hi, I was not expecting winegear to be good for cleaning boards. I have done a first cleaning and I tried to powerup the 5V. I can barely hear the chime ! Tomorrow I'll start recap, better cleaning and some reflow. I'm wondering one thing... why egret chip on an hardware poweron machine ?

I'm quite confident at recapping / resoldering..., my concern is that this time I see the board in a very bad state,,,

I have I recovered a Mac LC in a garage, when I opened it I see that there were no battery installed, which is good, but after a deeper inspection I realized that capacitors did a quite big mess. Do you think I can try to recover it ? Thank you Amedeo

It is nice! I’m ready for testing

Hi all, I have the DayStar power cache on my SE/30, thank you @Bolle I'm curious about one thing, I have FPU on daystar, but If I remove the FPU on card would the Mac use the FPU on logic board ? My guess is that PowerCache takes over the entire CPU/FPU, but asking just to be sure. Thank you

cool, thank you

Hi all I have seen a video by @JDW about color classic resolution upgrade. Do you know if that mod would interfere with Apple IIe board which uses res by 560x384 ? Thank you Amedeo

oh, this is a very bad accident. The PSU was recapped ?

@Knez how the high current happened ?

iirc the DayStar powercache also had issues turning on caches when running on SE/30, I'm not aware of DiMo, however the DayStar one works fine if used with @Bolle twin adapter that includes a built in ethernet. You could try, however every board have its own story, probably Bolle could give you...

I have also the analog board ( recap needed, I can do it if required ).

Hi, I have already posted this, but now for different scope. I realized, as some of you advised that is not worth repair. By the way instead of trashing it if anyone wants it for parts ( may be some chips / rom ), just ask. No charge, free. Only postal expenses, please consider that I live in...

Awesome! Take your time. I think we should have no rush. This is a collection hobby. No real use are made. Thank you so much!