Search results

Yep-- $25 each in my town for disposal. That's a tough choice for me between a SE/30 and a Mystic CC.   I'd probably keep the Mystic because it's so much faster than the SE/30 (and Color).

Do you get a chime on power up?  Have you recapped the logic board? Check all the traces for UE8 and make sure everything is connected.

I found some thick ( .020 ) PTFE tape with adhesive, but it's pretty expensive -- $20 for  15 ft x .5 inch.  That is enough to re-do the strips on a lot of mice. http://catalog.cshyde.com/viewitems/tapes-with-psa/fat-ptfe-tape i wonder if .020 might be too thick

Thanks-- I'll look around here and see what I can find.

That I found on the side of the road.  That brought me here in 2014, looking for info on the problems with it. So I started hanging out and reading here, and I ended up with this... How does this happen? :) G4 Cube, 1.5GB RAM, 120MB Drive. Modded with Dual G4-500's, a Radeon 7500 and a fan...

Has anyone replaced the glide strips on the bottom of an ADB mouse?  What kind of material did you use?

Got it-- I thought you might have been just looking for a date of manufacture.  On another note, I think there were some versions of the Turbo 040's with a small daughter card on the back. My guess is those were the earlier versions, or maybe the SE/30 version??

The date code on some of the components like U1 and U2 is 1995, so it's 95' or later.

Looks like a 'Turbo 040' card with the IIsi adapter card. Been looking for one of those 040 cards for my IIci. The 040 card is plugged in to the Cache slot on the adapter. Can be pulled out of the slot.

What version of a/ux are you installing?

Did you check for any cracked solder joints on the boards? Don't know if that's an issue on these PSU's...

Worked out great. Recapped the power supply and it started right up. My iici is 100 percent recapped, mobo and cache card too.

This is what I ordered from Mouser Mouser #    Mfr. #    Manufacturer    Customer #    Description 647-UPT2D471MRD    UPT2D471MRD    Nichicon        Aluminum Electrolytic Capacitors - Leaded 200volts 470uF 22X40 20% 647-UPJ1C102MPD    UPJ1C102MPD    Nichicon        Aluminum Electrolytic...

I was just about to ask if anyone had a list of caps for the Astec PSU's -- The PSU in my IIci still works, but might as well re-cap it. I'll find the part numbers at Mouser and add to this post.

I think the problem would be in the power supply / analog board.   You could remove the logic board and power it up and see if it blows the fuse, but I would check for shorted / damaged components on the analog board first.

I successfully rebuilt my PB500 battery.  I glued it back together with Epoxy. Once I got it back together, I used the Intelligent Battery Recondition and another utility from Lund and reset the battery.  Once charged, I get a little more than two hours life from it. I opened up my second...

OK-- I updated my SCSI2SD and tried my PB540.  I tried Special->Sleep and also let the unit spin down the drive after 4 minutes. This fix works for me.  Thanks to finkmac and techfury90.

I don't think copying the files to a shared drive would make a difference. As long as there were no network issues, it should be fine.

That's great news! I'll give this a try tomorrow and post my results.

Same here-- never had an issue. I just copied the entire drive over to an external hard drive, then back once the new drive was installed. Gerry-- I have a utility that I just found on a 92' Developer CD. It's called 'Blesser'.  I can send you that if you want. It might help if you run into the...