• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Search results

  1. A

    SE/30 and Macintosh Portable Schematics

    Most welcome!
  2. A

    sharing disk images between ZuluSCSI/BlueSCSI and modern Mac

    FUSE-HFS works properly in Monterey and Ventura, btw. I'm using it for most of my classic Mac image tasks now. Automatic mount arbitration and everything.
  3. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    Here are photos.
  4. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    Yep, I can. I'm also not invested in this particular card, I just had it lying around, but I just thought I'd see if Collin's tiny image would work.
  5. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    I used the stock ROM (39SF010) and DosDude's latest ROM image from this thread. And it's bailing before OF even loads.
  6. A

    PowerTower Pro has decided not to work with XLR8 CPU cards (soldered G3 and ZIF). Thoughts?

    I should mention that it runs *flawlessly* with my Newer Tech G3 card. It's been burning at 100% CPU for 36 hours, compiling a bunch of Tigerbrew packages, and is perfectly happy and stable.
  7. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    Have done, different slots on both Bandits, with no change. The odd thing to me is that the card worked fine pre-flash (usable in Debian PPC), and showed up in System Profiler and to the flashing utility — all until it was flashed, when it started to hang
  8. A

    PowerTower Pro has decided not to work with XLR8 CPU cards (soldered G3 and ZIF). Thoughts?

    Yeah, I went there first. I've recapped the logic board, and the power supply is a new 450W ATX PSU. There's no change with PCI cards unplugged, bare bones RAM, and no drives connected. I've reset everything that can be reset, including in OF and on the logic board, and I've done a deep reset...
  9. A

    SE/30 and Macintosh Portable Schematics

    I've cleaned up the BOMARC SE/30 schematics, and corrected an error in the video section. PDF and TIFFs are on my site here.
  10. A

    SCSI Zip Drives?

    I had an Epson Zip drive back in the day, with my Power Computing machines, and got nostalgic, so went looking. They were (unsurprisingly) more common in Japan, and I was able to find an affordable one on Yahoo! Japan (via Buyee, iirc). There's another brand that also offered a beige Zip drive...
  11. A

    PM9600: No video out

    Watching this, just picked up a 9250 and haven't flashed it yet.
  12. A

    PowerTower Pro has decided not to work with XLR8 CPU cards (soldered G3 and ZIF). Thoughts?

    A while back, a fellow hobbyist generously traded me an XLR8 Mach Carrier ZIF card for a Sonnet Crescendo G4 card (I have the rare late revision PowerTower Pro that "cannot and will never be able to" run Sonnet cards, per Sonnet. And the ZIF card worked pretty well for a while. It was spotty...
  13. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    Any insights into why a flashed SIIG 3112A card might cause a freeze on a PowerTower Pro (9500 based) before Open Firmware loads? The unflashed card did not, and flashed under OS 9 without issue.
  14. A

    Netatalk 2.3.0 available

    Understood.
  15. A

    Netatalk 2.3.0 available

    Ah. I was under the impression that Netatalk supplied its own AppleTalk stack, and that's what was removed in 3.x. I'll get involved in testing the userland stack you mention.
  16. A

    Netatalk 2.3.0 available

    Excellent! I've been able to build 2.3.0 on Ventura linking to berkeley-db@4 from Homebrew, but so far haven't gotten it running ("socket: Address family not supported by protocol family"). Exciting if it'll work.
  17. A

    Undocumented XLR8 ZIF Carrier Bus Settings

    Thank you very much! Now, if mine weren't dead as a doornail...
  18. A

    Power Computing Motherboard Compatibility with PC Riser and Case

    These are the two loose PowerComputing logic boards I have. One is a PowerCurve board, the other is a PowerCenter Plus. They have the same riser slot, in the same position. (Forgive the dust on the PowerCurve, I recently rescued it from a storage locker).
  19. A

    Power Computing Motherboard Compatibility with PC Riser and Case

    I have a riser card on my desk from, I believe, a PowerCenter. Here are photos, if they help.
  20. A

    Silicon Image SIL3112 Flashing: Easier Way Using flashrom

    Ah, OK. Sorry, missed that somehow when searching for the IC number. Oops. I have a programmer but... The properly flashed card with the 39SF010 hangs my PT Pro before the OS loads anyway, so I suppose it's a lost cause. Thanks. Fine work, in any case.
Back
Top