Search results

Looking for a drawing program that can run on a System 7 68040 that supports color, and hopefully some kind of swatch system, as well as an undo history. Also, I'm NOT looking for a vector editor (like Illustrator) What program best fits the bill? I've already tried Painter 4 and Kid pix but...

I cannot seem to get Mac OS 8.6 USB drivers to work. I bought a pci USB card with this controller chip: I've tried several different USB extensions on Macintosh Repository, but nothing I've tried has worked. Devices and Volumes recognizes that a USB card is connected, but nothing actually...

I recently bought Bolle's 040 accelerator to put in my iici, and while it seemed to work, I decided to run a tattletech report, and it only reported back the 68030 @ 25Mhz, and when I went to the Nubus/PDS slot section, it said 0 physical PDS and 3 physical nubus. Is this a shortcoming with...

I have a monochrome Pivot monitor (0194) with the DB-9 video connector, but I do not have the cable. I've seen people talking about finding the pinout for the DB-15 to DB-9 that goes between the card and the monitor, but I cannot for the life of me find anywhere that someone actually posted it...

Does anyone know what the thread pitch for one of the crt screws is? I picked up an SE/30 recently that, turns out, is missing one of the screws holding the CRT in. I can get the other dimensions from the other screws but I don't have anything precise enough to get the pitch. Basically, my plan...

Hello Everyone! Picked up a IIsi for very cheap the other day (for reasons that will quickly become obvious.) Looks a little dirty, but don't worry. It's not dirt. Inside this machine was some of the worst battery-bomb carnage I've ever seen. The "MDU" chip seems to be the primary victim...

Hey guys, I've been using the Classic I restored lately, and in the past week or so it's developed this issue where it starts emitting a really high pitched whine after being on for a few hours. I'll attach a video of the sound. I don't really know why it's doing this, and I don't see any...

I've been trying to get my Macintosh plus to work with the "Simple Wifi modem" (https://www.tindie.com/products/8bit_bruno/simple-wifi-rs232-modem-v2/) for a few days now, and it seems like no matter what, I cannot get anything from it to the Macintosh or vice-versa. There doesn't seem to be any...

I'm working on a Macintosh Classic which has unfortunately seen the bad side of a clock battery. The damage didn't seem to be too terrible to me, but I replaced all the caps on the logic board (have not touched the analog board, and don't intend to if I don't have to). I've also repaired a few...