• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Search results

  1. R

    Macintosh Plus 4MB - Installing DaynaPORT Drivers under System 7.5.5

    I have guides on my site on how to update to the full version, typically I use Basilisk II to do the update using Apple’s Legacy Software Recovery CD from the Internet Archive as the source of the update files. Because you have the PiSCSI, you may be able to put the Legacy CD image directly on...
  2. R

    Macintosh Plus 4MB - Installing DaynaPORT Drivers under System 7.5.5

    This is Steve from SavageTaylor.com Did you update my image to the full version of 7.5.5? I have an actual Asanté device that I use and it needed the full version of the system installed to work properly. I have a guide for the Plus and 6.0.8 on my site. I hope to experiment with the piSCSI...
  3. R

    Throwing 64K ROMs into a Mac Plus ?

    The newlife adapters needed the 128k rom upgrade in order to work
  4. R

    Anyone have a copy of "AppleTalk Phase 2 Protocol Specification" (C0144LL/A)?

    He responded! He's looking to see if he has a copy.
  5. R

    Anyone have a copy of "AppleTalk Phase 2 Protocol Specification" (C0144LL/A)?

    Well, as a long shot I just sent Alan Oppenheimer a message on LinkedIn, he presented at WWDC 1990 about Apple Talk Phase 2 and referenced the document you are looking for. He was part of the original Macintosh networking team.
  6. R

    Anyone have a copy of "AppleTalk Phase 2 Protocol Specification" (C0144LL/A)?

    I'll keep an eye out while I finish going through the Apple CDs I'm writing about on my site. I assume you've already looked at the different technical and knowledge base articles from the late 80s and early 90s about Phase 2. Eg...
  7. R

    Anyone have a copy of "AppleTalk Phase 2 Protocol Specification" (C0144LL/A)?

    Is there a copy on one of Apple's early 90s CD? https://www.savagetaylor.com/2024/02/18/apples-inside-macintosh-1984-to-1996/#spinside_mac_1989_to_1993
  8. R

    Performa 475 howto install 7.5.5

    What SD card did you use? And did you format it before you copied on the image file?
  9. R

    Quadra 605 CD Boot?

    Is the Yamaha the external drive you have attached? I thought there was an issue that Apple computers would only boot from Apple branded CD-ROM drives? Have you tried @Phipli 's 7.6.1 image? https://68kmla.org/bb/index.php?threads/booting-a-mac-with-a-3rd-party-cd-rom-drive.46540/
  10. R

    LC 630 DOS + OS 8.1 = PC SETUP will not load

    So, played with this again a last night, I downloaded @jeremywork's image and copied the system folder to my IDE drive (CF Card) that I had partitioned using MultiFormater (I was hoping to make a mix of HFS, HFS+ and FAT16 volumes/partitions, found out that isn't a supported option for my IDE...
  11. R

    Feature comparison of the various SCSI to SD options?

    I made some changes to try and better describe what RAW is vs. the image files stored on a FAT32 or exFAT formatted SD card. For CD-ROM image files, the MacSD documentation described in detail that it supports BIN/MODE1, redbook/audio and mixed-mode disc images. But I'm note sure for BlueSCSI...
  12. R

    Feature comparison of the various SCSI to SD options?

    I'm planning to update my downloads page and add some new guides to my website for the various SCSI to SD options that are now on the market. As a first step, I'm creating a list of current options and doing a basic feature comparison. Reading through the guides for BlueSCSI and ZuluSCSI, I...
  13. R

    Performa 475 howto install 7.5.5

    I usually us Basilisk II to set up my drive images to use with BlueSCSI, ZuluSCSI etc. https://www.savagetaylor.com/2018/09/02/setting-up-your-vintage-classic-68k-macintosh-installing-the-full-version-of-system-7-5-5-or-6-0-8/ For the German versions, check Apple's Anthology DVD. You should...
  14. R

    Looking for the Plastic guard that goes around the pins for a PDS card

    I have an accelerator card for the SE that is missing the plastic guard that typically goes around the pins for the PDS connector. Is there anywhere I can purchase these, or will I need to take it off something else? Picture is an example of what I'm looking for.
  15. R

    SCSI for Dummies Thread - How to properly use SCSI

    Technical Note HW540: SCSI Port Q&As: The Macintosh Quadra 900 is the first Macintosh computer to provide a separate, internal SCSI bus. This bus is physically isolated from the external SCSI bus and must also be properly terminated. The cable provided with the machine includes all the...
  16. R

    Looking for anyone who has a Zulu SCSI and Quadra 700

    For the Quadra 700 issue, have you seen the TechNote? Technical Note HW540 SCSI Port Q&As: Macintosh Quadra 700 and 900 SCSI chip anomaly and fix A problem has recently been found with the SCSI chip on the Macintosh Quadra 700 and 900. In a nutshell, the National 53c96 chips that are used in...
  17. R

    Do the classic Macs support DMA?

    Technical Note TN1018: Understanding the SerialDMA Driver: each DMA-capable Macintosh from the Macintosh Centris 660av through the Power Macintosh 8100/110 (1993-1994) Technical Note HW540 SCSI Port Q&As: Currently A/UX is only OS to use Macintosh IIfx SCSI DMA chip
  18. R

    Apple Reference and Presentations Library (ARPLE) CD Collection

    Thanks. I'm enjoying the nostalgia. I couldn't do what I'm doing without people like @MrFahrenheit uploading their collections.
  19. R

    Apple Reference and Presentations Library (ARPLE) CD Collection

    Slowly making my way through all of @MrFahrenheit's uploads and writing descriptions of their contents. The CDs and manuals he's uploaded have been a great source of information.
  20. R

    AppleTalk Over IP

    I know this is an old post, but I was looking for a solution to this too and found IPTnnl: https://web.archive.org/web/19980122194308/http://www.cs.mu.oz.au/appletalk/doc/IPTnnl.userDoc.html
Back
Top