Search results

Only thing I found was Version 1 on a Software of the Month Club August 1995 CD-ROM. The only other thing I can think to do would be to see if Mark C Smith is on LinkedIn. I just sent a note to a Mark Smith who went to U of M from 1990 to 1996 and did software development for Netscape and Aol...

You could try the newlife drivers, both newlife and Novy seemed to use a lot of the same drivers. https://www.savagetaylor.com/2023/01/17/68k-accelerators-newlife-computer-corporation/ I assume you tried the Novy Railgun drivers? https://vintageapple.org/macdrivers/accel.shtml

Does anyone have, or know about the Abaton Multitalk? I was going through the TIL articles and found: TIL04140: MultiTalk: No Longer Available for AppleTalk Network MultiTalk lets AppleTalk network users share serial devices. It has four mini-circular-8 connectors: one for AppleTalk (RS-422)...

Finally found one in an ebay listing that gave the non-branded model number: ITE e230076, hopefully this time I receive the right thing.

Having difficulty finding this, plenty of adapters with the GRD and +5volt pins flipped from what you have. I thought I had found what I needed on amazon, the icon in the product pictures was correct, but when it arrived the actual product had the icon below.... Trying to figure out the right...

On further testing this is not a 100% solution (wiped volume), sometimes it works, sometimes it doesn't. My plan now is to setup an basic 8.1 installation on my 32GB CF card and create an image of that card for myself, and others if they want it. For whatever reason a 100% working approach for...

Found a potential match for the 820-0745-A in the Parts DB on the Service Source 1997-10 Main CD. Part number 661-1181 for a 60pin dual-line card.

I have the later card 820-0745-A from 1995 with a 60 pin connector that I'm trying to find information about. I also have the 820-0567-A card from 1994. So far all I've found is mention of the 661-0159 being replaced by the 661-1073 card on page 80 of the Apple Service Guide Volume 4.

Success! @AndiS, @360alaska, @jeremywork Just did a test, did a full erase (erase, plus Burn 2.5) of a volume that previously had a non-working installation of 8.1 + PCsetup, then a new install.... PCsetup worked! Erased the volume Ran Burn 2.5 on the volume (Burn 2.5 is also on my System 7.5.5...

So I was playing with this again using @jeremywork's image as a starting point. I've discovered something odd: If I copy the working system folder from jeremy's image to a "new" blank drive image it works, but if I copy the system folder from jeremy's image to a drive image that previously had...

And the URL of their site, nice find, https://web.archive.org/web/19980128161121/http://www.2ndwave.com/products/xpansion.html

Looks like the company also made a PCI to Nubus bridge, and there was a requirement for 32-bit clean applications. The closest thing I found to a technical note so far is: 7.2.1.4 PAL DEVICE. A 16L8 PAL is used to generate chip select signals to the DDLC and '374 address expansion register. The...

Good to know, I'll need to add a note to my site. Most of these modern options have Mac Plus specific settings

Ah, thanks. I can work with that, it would be similar to how I had to do a RAW write to an SD for SCSI2SD, or the partition setup option for the MacSD

Try https://www.savagetaylor.com/wp-content/uploads/68k_Macintosh/Bootdisks/320_32MB_volume.zip. I initialized it on my Plus, and was able to boot using my FloppyEMU, what I don't know is if that added the MBR

Ah, if I remember correctly I initialized them on my Plus, I thought that would add the MBR. Will check

The System 3.2 and 4.1 images I created for the FloppyEMU should work without modification I just got a Mac 512k to experiment with

So no luck on the document so far, but Alan Oppenheimer did respond "I have lots of other documents, and if I ever retire, maybe I'll organize them (I gave a bunch to Stanford many years ago too). Right now I'm way too busy (big intro next month; see artauthority.museum). It would be fun to have...

Interesting, I wonder if we could make a modern version? More info https://archive.org/details/upgradeyourmacin0000bran/page/243/mode/1up?q="second+wave" https://archive.org/details/mac-week-v-3-n-8/page/n14/mode/1up?q=%22second+wave%22+%22expansion%22+%22chassis%22...

Ditto, I do most of my setup using an emulator like Basilisk II and then just copy everything to my 68k macs, either over the network, or by editing the contents of a single volume drive image on an SD card that I then use with my ZuluSCSI, BlueSCSI or MacSD adapter.