Search results

First option worked! Thank you!

Oh I have this. I should be able to get it to work with my 6300cd?

Hi there! I have a performa 6300 CD, which works well with my multi sync monitor. However, on my workstation, I have a VGA compatible display. Can someone tell me what I would need to get this computer to work with the VGA display?

Does anyone have a logic board with an 68040 that will fit in a case for a Performa 600/IIvx?

Proof!

Buddy 3d printed a model that I got from @PotatoFi

Still working on my SE/30. Recap—check Install BLUESCSI bracket and drive images—check Replace stick ROM with Rominator II—check 128mb RAM, here I come!

Honestly, If the problem is somewhere in the board, I'm probably out of my depth. I'm getting better at trouble shooting, but that may just be too much for me. If it was free that would be one thing, but for $75, I should be able to find a better board, no?

I did ask tabling leaky caps and a fishy smell he said no. Do I want to throw $75 at this?

The seller hasn’t provided that info. Here’s what I got. Seems like a nice guy.

It behaves the same for multiple drives in multiple SCSI cables. It sounds like the problem. It’s either in the logic board or the power supply. It seems like it may be too big of a project for me.

Hi there! I want to upgrade my Performa 600. I read online that one upgrade path is to get a logic board from a Centris 650. I think I have found one, but the seller reports that one the Centris gets warm it no longer boots from the hard drive. He has replaced the HDD and SCSI cable and gets...

Thanks for the advice. Is it possible to use the multimeter to determine polarity of a cap? I'm thinking put it on high Ohms, connect black prob to negative, red prob to posiive and see if I get a reading...is this correct?

Omg. I feel like an idiot. Thank you.

Hello! A friend and I just finished a recap of an SE/30. We did the analog board, logic board and PSU. Finally went to test and cap at C7 of logic board burned up and exploded. Not sure what I did wrong. I have pictures that verify that I oriented it in the right direction. There was a lot...

Thank you for confirming what I thought. Yes, I am using an LC II as a floppy drive tester. I have a drive that’s driving me insane! It will only read prodos formatted disks! I have been fiddling with the alignment for days and I can’t get it to read hfs. I’ve given up working on it and was...

Will it work if I plug my Sony 800k floppy drive (internal) to the floppy port inside my LC II? Will it recognize these disks? It should, right?

Thank you for the tip. That diode seems okay. I think my issue is with the bluescsi device.

Does anyone know if a Macintosh LC II has a SCSI termination fuse that could blow? If so, where is it?

Hey guys, I have an unusual issue that hasn't cropped up on any of the Sony 800k floppy drives I've messed with. This one appears to be dead. When I plug it into my trusty LC II it does nothing. Doesn't spin, doesn't try to eject, nothing--no power. I know it's not the floppy port on the LC...