Search results

Oh God... I just realized I'm thinking of Sheepshaver... that's the disconnect; I apologize.

http://www.mouser.com/search/ProductDetail.aspx?R=0virtualkey0virtualkeyKMDAX-9P

It looks like what I posted ... somewhere, definitely on vintage-computer ... about the Atari ST pinout was correct; this is the bus mouse pinout for the MS mouse from here and the Atari pinout from here or here [which reverses the Xa and Xb seen below]: MS --------------- Atari Black | 1 |...

Wait a sec... where's the page/thread that was curated/updated by a gentleman from the Netherlands?  I cannot find it now (last looked probably a few months ago).  I don't believe that was Google Code, but when did Einstein migrate off? I used to get my builds from there; though maybe they were...

Give me an Outbound and I'll let you know ... ;)

Yeah I was just about to correct myself when I realized I was making an arbitrary distinction in my head.  And yeah I have the InPort card also; meaning that the equivalent controller is on board the ST (etc.) and at least in theory the mouse shouldn't matter? I don't need the MS InPort mouse...

Archer, I'll probably cut something up; but Mouser no doubt sells the connectors; I just bought one for VGA. And yeah for sure, Gorgonops and avadondragon - I just happen to have a bunch of spare ADB mice.  I also have an MS (2-button) bus mouse.  But three-button bus mice might be a little...

Wow... I actually tried to find a contact email for this dude to express displeasure, but I didn't see one quickly.

http://atariage.com/forums/topic/198878-mouse-conversion/ I just got a reasonably cheap Atari 1040STF without any accessories.  I jury rigged a VGA cable that I'll solder into a real 13-pin DIN connector when it arrives, but I still have no mouse.  The potentially easiest way of circumventing...

See avadondragon that was my thought - thanks very much.  Some FreeBSD documentation I found suggested that OS (and maybe NetBSD) may actually be able to run the card OOB (or there may be drivers, not sure).  But truthfully I haven't had a lot of time to try this all out.  I will play with these...

You guys are probably going to skewer me for this... I bought an unclear SCSI card on the gamble I might be able to use it in a PC.  It doesn't have clear identification marks but the chip is a Symbios  53C875 and there's a 4-K label on the outside-facing part of the card (by the port).  Windows...

Well so this is what you mean? https://68kmla.org/forums/index.php?/topic/23721-help-with-macintosh-se30-horizontal-line/ Is it possible the difference in width is a camera issue/parallax or something? Here's the manual's entire debugging process: "Single horizontal line is displayed 1 Replace...

http://www.biwa.ne.jp/~shamada/fullmac/repairEng.html#HorizontalLine #6? Vertical sweep circuit on A/B? Uni, it's a horizontal line.

I was just basically following the manual. Yes mem card in 0. I thought the manual said that was fine (maybe not), but I was a little lost as to how the PR#0 command wouldn't just activate the mem card. But I also may have tried it without. It's an 'EZRAM 2' card. Are those common? Oh...

sorry... i didn't mean exclusively vga... showing my (not very advanced) age a bit. [Yeah obv. that's the screen size (even though it's also the aspect ratio) because it's just a CRT (/TV) monitor; so that's the slot size.  A little hard to find 9", no?] Ipad screen: Is it going to cost...

I have a spare SE/30 case I was going to sell cheap or part out, but I think I'd rather do a casemod project for my old machine that I at this point only use to write 5 1/4" floppies. Can anyone recommend a 9" 4:3 lcd screen/inverter - cheap?  [is that the aspect ratio...?] In the alternative...

Thank you

What I mean here is not necessarily getting in "above" the board under the chassis-top, but do people adapt power cables or something... how do you actually get power to the board outside the case?

Thank you.  I had tried that before and that was actually my reason for asking.  When I type "PR#1", the prompt ROM/ProDOS (tried both) prompt disappears leaving onlyl "PR#1" is displayed.  When I then type "PR#0" there's no change.  I had resocketed the chip.   I do note that on that...

There are two SE/30 ROM versions (that I've seen); neither will say "SE/30."  The one you posted is 820-0241-02 / 630-4339; the other is 341-0655A [i'm not clear on the consistency of those serials...].  You can also put other more exotic ROMs in there.  I would be surprised if they'd boot...