Search results

Thank you so much @bsteckler ! Did you do the recapping as preventative maintenance, or was it starting to have issues with leaking caps?

Thank you for uploading that video which 100% confirmed that this was it!

almost 2 years later, "Rock, Rap'n Roll" is what I was thinking of! By chance I came across it at a video game expo while looking through a table of big box PC & Mac games! As soon as I saw the box, I was like "wait a minute..." and looked at the screenshots on the back and was 95% sure it was...

True! The other advantage of the aftermarket ROMs is (at least some of them) disable the full RAM check upon first boot. So if you max out the SE/30 with RAM, could definitely decrease boot time(but yeah, that's also a bit of a niche usecase)

Take a look at this...

long story short, and after much parts swapping, its an issue with the CRT tube. swapped it with another one and that works

Spent some time playing with my Airtalk today. When I first connected them, I connected them to my eero network(mesh wifi system, but both the airtalks were connected to the same AP), and noticed it was really slow. Don't have a speed or anything, but had 1 connected to my localtalk imagewriter...

Oops, for the line that says "tap around the logic board", that should say "Tap around the analog board" (If only we could edit posts)

video - Analog board has been recapped, no cracked solder joints or anything that I can see. I reflowed the joints for the flyback, and all of the connectors that go between the logic board/CRT. Happens with multiple logic boards If I have it on, and tap around the logic board with the...

Hey all, I picked up a G3 AIO Molar Mac a few weeks ago, has some flyback issues so I'll be replacing the flyback with a new one, but figure while I have it open I would like to recap it too so I don't have to open it again in the forseeable future. Does anyone have a cap list handy for the...

Try the RaSCSI-Boot-7.5.3.hda_.zip https://macintoshgarden.org/apps/rascsi-68kmla-edition Unzip it, and renmae the file to be hd10-512-machd.hda

the image probably doesn't have an OS on it

The image needs to be a HDA file placed directly on the SD card. It looks like you somehow extracted the image or something?

It goes to that via

I just kind of assumed it connected somewhere to that chip, since it didn't appear to exit from under the chip anywhere. On my board luckily I still had the pad attached, it was just lifted from the board, so I was able to use one probe on my meter on the pad and 1 probe to figure out which pin...

Just checked, yeah C15 gets to that pin, so if theres continuity you should be good

I can double check tonight, but I'm like 99% sure that pad goes to this pin (I'm recapping a Classic 2 and that pad happened to get lifted on this one as well)

The termination will not be working right since one of the resistor nets(used for termination) is too small, and is likely at least part of your issue. Also, like claanu said, the bluepill itself is supposed to have 2 jumpers on the bluepill itself, Otherwise it's not going to be actually...

I'd be interested in 2 or 3 of these as well. Been playing with some localtalk stuff but my desire to run phonenet cables around the house is minimal.

I recently picked up a couple of clamshells, one working and one that was sold as for parts. On the parts unit, the LED around the power plug flashes green for a second and then turns off. Any idea of things to check? Power adapter is a yoyo adapter and is known to be good. If it's an...