Search results

That would be awesome! Yes I can burn a copy and ship them back happily if that’s ok?

Well it worked!!! I have a DAC960 PCI Raid card working flawlessly inside an ANS 500! So if anyone tries to do this you need to get the proper DAC960 board with 2 channels and should include the battery board (which I have disabled through the utility). There are many DAC960 versions but you...

So I had the hardest time with getting a Bernoulli disk loaded or mounted with the proper driver after I accidentally formatted it. After many hours what I found out works best is to use FWB Hard Disk Toolkit 2.0 and do a device copy from a "good Iomega disk" with the proper hidden Iomega...

Jajan547, yup I ordered those.. a little worried as they say “twisted pairs” in the description. I’ll see if they in fact work.. I’ll let everyone know..

So these are the cables that are needed if you add a Mylex Raid Card to the ANS… I’m having trouble finding them. I guess it’s a SCA68 female to HD68 Male. Here’s what they look like

Oh and an FYI to anyone who’s upgrading their RAM on their Mylex DAC960 Raid card it will take up to a 32 MB FPM Parity 72 pin RAM stick. Non-parity EDO didn’t work. And I think I mentioned this before. I turned off the cache battery in the Raid Utility software you boot on from floppy. I...

This is the end piece I need going to a 68 pin male. Do these cables exist??

Looking at the old RAM it appears I need a FPM parity module.. not the EDO I have..

Hey gang no ideas on this cable?? I also am trying to figure out the proper RAM module for the RAID card. Specs say a standard 72 pin SIMM up to 32MB. I’ve tried one that’s EDO.. won’t work.. so what do I need?? Parity or non parity??? The First photo is the original that works.. the second is...

Anyone happen to know where one could obtain the proper cables for the ANS 500/700 SCSI raid card. It appears to be a 68 pin scsi ultra connection. But the connector on the main logic board appears to be a small 68 pin female centronics type. Is this even available? The connector on the Mylex...

Yes it looks similar. So I guess it may be dried flux then. I did finally pull open the display. I only found a 2.2 @ 50v cap on the interconnect board. In fact I only tilted the plastic cover so much so I could remove the interconnect board and recap it, so I didn’t pull the whole display...

Hey so I had a chance to pull apart 3 Wallstreets. I removed the PRAM batts in them before storing them. I was neglecting this and before I forget just had to do it. At any rate I did a recap job on the total of 5 caps in the main unit (not the screen). I did notice a few beginning to very...

Byrd not to drag on again about the memory thing.. but that Memory Masters increased their price to close to $50 per DIMM now. But what doesn’t make sense they also sell I’m thinking the same thing for $25.00 but specifically labeled for the PM8600… I’ve got both machines and the memory looks...

Great info. Searching on fleabay it seems I can only find it shipping out of Germany.. 🤔🤔🤔 The EM-30L but the Molykote is available in the US.

Oh awesome that would save me having to remove mine and then reading it and possibly damaging a good card!!! Thanks Scutboy for everything!

I actually got a Miniscribe 8425 up and running... replaced all the tantalum caps on them as I have noticed some bad ones in the past on them. Perhaps there was a bad batch that's why so many people have bad Miniscribe's. I am theorizing that perhaps some bad tantalums zapped other components. I...

Scutboy I think I am going to try to give this a go. Got the programmer the PLCC chip remover.. and getting the EPROM 32 pin adapter. I just need to know what blank to order. Once I read the chip I'll upload to here the bin file for it for everyone. We'll see how I make out.. i might end up...

Wrong adapter... I did find and get the 32pin I need...

So it looks like it is a 32 pin PLCC blank chip I need... any idea on what one I would need to get? I still might just send this to Trag but just out of curiosity..