Search results

Well sound is important, I’d call it a win, however if you really are set at the headphone jack working, LC III boards onwards to early PowerPC use the same chips etc, bad boards on eBay are a source But cannot be guaranteed they are working. you may be able to acquire one from someone here...

With no sound chip on the board, it will fire up from soft power on keyboard, but will not go further than a grey screen, no cursor.

Thanks, future proofing the thread!

What are 341s0788 and 343s0129? is that tech for egret and sound chip

I have had some success with epoxy glue and filler, the real work comes when sanding back filler as it will sand of texture on the casing, and reveal the original colour. this itself is another problem, as I’m trying to work out the correct mix of colour for the case for a match this is my...

A 7100 board, I not sure if the Rez is high enough?

I’m afraid I have no idea, mission was to recap, and maybe remove wire from egret, and see if it still functions. I think at this point I will leave as it is.

I have one of these units, exactly the same , I will post a pic later after work.

Pretty sure that’s just Glue. not sure about a new/old replacement but I’m waiting on a response like you

Good afternoon, as was wondering as the title says, if anyone had a Original install disk for the thundercache pro? and or the utilities disk image’s I know they are available on the repository, garden, and micromac has updated versions available for download, however, I would love a...

Good afternoon, as was wondering as the title says, if anyone had a Original install disk for the thundercache pro? and or the utilities disk image’s I know they are available on the repository, and micromac has updated versions available for download, however, I would love a original Non...

Hi,  the Mac is switched on, rear casing removed ,  I can hear power going to the crt,  but no life soft power no longer works. even with motherboard removed, there is no change

Hi all, again, so as the title says it’s a colour classic.. I’ll try to keep this brief..  as usual I recapped both boards, with emphasis on the analogue, and hey presto, soft start, and eventually power was restored, the machine functioned once again. I was very happy , then last week I...

Ok so problem solved, PP1 Phier replaced, wht da ya know ;)

Hi all, this has been totally recapped, analogue and logic, but I’m getting what only can be described as interference on screen, both sides. I expect you’ll tell me it’s a cold joint somewhere, I just cannot narrow it down, any help would be much appreciated, thanks

Although I am no expert, I have 3 colour classics, all undergoing resto... stick with the logic board for now, if you can power the machine from the keyboard (soft power) the analogue board is functioning for now. the empty slots do not need to be filled to enable your board to work, you do...

I feel your pain,  these damn machines are so temperamental, I’ve just recapped analogue board and it was working fine, then this morning , hard disk not recognised, and later no power! I hope someone can help you, I have a feeling the pot is not at fault. 

Hi all, just wanted to say “Thanks” to all i have success   let the clean up begin..... btw, for future reference, its a revision b classic

Ok, so I re soldered the joints on the usual suspects, and reflowed on some others,  restarted and I have an image. it’s very dark, and only 50/50 , the board powers a hard disk and floppy drive, but they do not allow a boot process to start

Did anybody come up with the solution to this problem? I have exactly the same symptoms, I’ll resolder some joints today. the board has been totally recapped, so I’m hoping that should do it.