Search results

Hi AP, thanks for the encouragement. Yeah, I can replace the CCFL tube - I actually did that a couple of times - but my success rate of 50% isn't really acceptable. I'm really much better at hitting a PayPal "Pay" button. Once the LCDs get well warmed up they come to a nice, bright state...

Does anyone here offer or know of an LCD backlight replacement service. I have two otherwise great Pismo displays that are red and/or dim and need to look more like new. A response here or a PM would be greatly appreciated. TIA

Does anyone recognize this logo? It is on a couple of older power cables and other stuff, enough to make one curious. TIA.

To use ADTPro you can connect a USB-equipped Mac to your IIGS with a Keyspan USB-to-serial adapter and a crossover MiniDIN 8 serial cable. I have more info if you think this would be the way you want to go.

As an OS Jaguar is such a slow wreck and really not complete. If XpostFacto can install Panther instead of Jaguar you would have a much better test of your hardware.

IIRC VIA chipsets are simply not compatible with Apple gear. DLink DFB-A5 Rev.A1 3-Port Firewire, 2-Port USB 2.0 PCI Adapter for Apple and PC - this is in the USA, like the one in the UK http://legacyfiles.us.dlink.com/DFB-A5/REVA/DFB-A5_DATASHEET_1.00_EN.PDF. - "OS X 10 &...

"What about inside the display assembly, anything to worry about in there?" Except for the mechanical stuff and the cables there's nothing in there a mere mortal can deal with.

Maybe to start over with which PowerBook G3 you have. Certainly a Pismo will accept 128 GB SSDs; probably a Lombard will also but it will be a lot pickier about the mSata-to-IDE adapter. A Wallstreet - I don't know, maybe someone else can help.. I really, really suspect your adapter. I've...

The jumper on the adapter needs to be set for "master". Usually that means you just leave it off.

With an active Wi-Fi available just keep the 'Book  with the Date and Time Control Panel (OS 9 nomenclature) set to use the Time Server. You get an almost immediate correct clock set when you start up.

Just right. That has BOTH tips. It would be good for the G3 & G4 'Books. Good luck.

The pic on the right top has the two PowerBook tips. The pic on the left bottom is from eBay https://www.ebay.com/itm/Kensington-Univ-AC-CAR-AIR-Adapter-APPLE-MAC-33079-power-charger-case-F-Ship/254210700745?hash=item3b302375c9:g:OGkAAOSwgspZubzm . I don't know anything about the seller

The "this" isn't the right one - the DC end is the smaller one for the G4 'Books. https://www.ebay.com/itm/Kensington-Univ-AC-CAR-AIR-Adapter-APPLE-MAC-33079-power-charger-case-F-Ship/254210700745?hash=item3b302375c9:g:OGkAAOSwgspZubzm has the correct DC connector. It seems that most of the...

I've given up on trying to find a reasonably priced yoyo adapter and don't really trust the Asian generics. Kensington had a replacement at one time. Try model number K33079 on the Bay. AichEss

FWIW I have a ROM1 board that has exactly the same mods and it checks out 100% good with any of the IIGS diagnostics I have. Do you have an Apple Diagnostics 4.x disk to home in a bit on the problem area? I'm going to guess that the 607-1073-B is the modded revision. AichEss

THANK YOU NJRoadfan. I had googled "Sequential Systems" and got many, many pages of logic, circuit design and other non-helpful stuff. I didn't go all the way thru' the search results (88,800,000 hits) and might not even have recognized those pages if they came up. AichEss

This card came to me in a IIe. It was in Slot 4 if that's any help. Thanks, AichEss

A different mSATA to IDE adapter should be a first choice. I've had good results from the generic Asian-sourced adapters on the Bay. And they are jumperless. Good luck. AichEss

For your Item 1: In your download and moving around process your Mac changed the .pkg extension from the Newton type to that used by OS X. See the first pic Here’s my procedure to undo this on a PowerBook G3 with MacOS 10.4.11 1. Do a "Get Info" on the downloaded pkg file - The second pic 2...