Search results

Thanks guys. I'll give a try and will post the results here. ;)

Hi guys, Most of us use this kind of 68-pin to 50-pin adapter: (both ends are male) They aren't that expensive, but I have found cheapers models of that kind : (both ends are female) My question is : will the latter work if plugged bewteen a mac 68k mobo and a 68-pin scsi flatcable...

Well, Wiebtech's flasher actually accepts to flash that 4mbit-eeprom card, but it doesn't turn it into an usable card : :?:

Wiebtech's flasher refuses to flash that card because of the "unsupported eeprom". Should be possible to flash wiebtech firmware using UPDFLASH.EXE on a PC, but I don't see the point in trying that. Any Sil3112 based card theoretically works with this small fimware.

Picture 06 is missing :-/

I bought a few cards as well and couldn't wait to give these a try. I flashed the SeriTek/1s2 v5.13 firmware to one card using the DOS utility It returned the 0 code, which means successfull flashing. I then installed that card in my QuickSilver. The QS boots* but... The flashed card is...

Too bad there's no workaround for the bug that prevents G4 DA & G4 QS from booting with a Silicon Image PCI card installed. Oddly enough, my QS once booted with a Sil3512 card (with pc bios) installed in the leftmost slot, but flashing attempt ended up with a "bus error" result from the...

Hello and Happy New Year to you guys ! Just wondering: do B&W G3s and pre-MDD G4s accept ECC Registered memory modules ? I know that standard and registerd ram should'nt be mixed, but what if the G3/G4 ram banks are populated only with registered ecc ? Cheers.

I'm happy to report that the card is recognized by 10.2 & 10.4 installers, and is bootable on my B&W G3. I'll try with 10.0 and 10.1 soon, just for fun :p I'd be curious to see if a SATA optical drive is bootable...

I Bumping the topic as well, cos I just got one from an ebay seller. I'm searching for the driver, in order to test the Powerview ;)

I can confirm the 3512 models from Syba are still flashable with Wiebtech's Mac Firmware. I gave a try on my B&W G3 and it works (haven't tried booting from it yet).

Hi, I recently bought a G4 Gigabit mobo from an ebay seller. It arrived few days ago undamaged, but after testing it this aftertoon, I detected a weird problem. The second IDE bus is not working (the one for optical drive). In fact,the Apple System profiler doesn't even show the 2nd IDE...

Is there a chance a 4-port version (see pic) could work ?

Thanks. I'll post my results if I give it a try. ;)

Hi guys, MacJunky > can you provide a picture of this card ? Thanks!