Search results

I get a black screen of nothing if I try. The system boots and runs normally (well, I am chasing another problem with getting USB cards working but I don't know if this is connected). I have mashed the CUDA button plenty of times, reset PRAM, PRAM battery is working. The machine apparently...

E-waste crackheds strike again! Yes, it's another cut cord monitor. This one's very, very painful to disassemble but here's what's left of the monitor cord: The monitor consists of 4 PCBs inside: a shockingly tiny neckboard, a power supply board, a deflection/HV board, and an input board. The...

I have here a Quadra 800 that *only* puts out sync on green no matter what adapter I use. I also have a iisi here and that will put out csync on the hsync line if I configure the adapter right. That same adapter, configured identically, is not putting out sync on the sync lines when plugged into...

I have checked all over the net. All that's left are cheapo ones that do not have high byte termination, which means they work with next to no drives. For that matter I can't seem to find 68-50 adapters with high byte termination either.

Tried the 128GB version of this guy, having high hopes. Doesn't boot. It shipped with the ID already jumpered, but if you remove that jumper it apparently IDs as Slave, which is the reverse of how all actual 2.5 hard drives behave. The Wallstreet's connector extends into the jumper area, so...

Does anyone know the make/model/part number of the ribbon cable connector on the PB170 LCD? This would be part of the Hosiden HLR1014 and not in any Apple service manual. I have one here that won't make proper contact even though it's been cleaned and reflowed. Pics for reference(source)...