Search results

I realised there are other options for "fixing" a CRT. There are solutions in AliExpress as well as open source projects (I was told about a guy showing his solution in an IT retro fair, but was not able to find it): *a new CRT driver board*. They all offer VGA input. e.g. link Adrian has a...

Shame on me — the brightness connector had come loose during disassembly. Now the image is back, but I still can’t set the brightness and contrast correctly: it’s either too dark, or, when I increase the brightness, diagonal stripes appear. From this, I can reasonably conclude that there is a...

mmm, not really, they were all brand new and from known factories ... this does not prove much, but, no, I did not test them. The ESP can be critical, but I thought I could improve the parts later if the image was not good enough, but this is ...bad!

I have a Macintosh 12" RGB M1296Z that was working properly until the image on the screen became slanted and compressed along the vertical axis. I disassembled the monitor and found three leaking capacitors in what I believe are in the VSync section. I was unable to find a replacement for the...

https://68kmla.org/bb/index.php?threads/how-to-mod-an-atx-psu-for-10-pin-macintosh-for-example-iisi-iici-quadra-700-and-others.30302/page-4#post-485562

soft start, apologies FYI

the IIsi has software start, CayMac offers a board to do the trick. https://ko-fi.com/s/d39b78d435

hi mate, the IIsi has software start, CayMac offers a board to do the trick. Others here can describe a “do it yourself” board,

Hi @wottle , yes, I created the system myself. I'm a software engineering guy, now doing hands-on only at home, 'cause at work I just "power point" :) .. or better :( Anyhow, the system is very simple; not much development is involved, if any. For those who might be interested: - a Synology NAS...

@cheesestraws ... OMG ... yes they are two firewires, not DisplayPort... my bad, apologies :( I have not yet made an offer yet, it's working, OS 9.2 installed What is the small daughter card with lots of capacitors?

is it something rare? I'm not in the G3 really ....

Indeed... if living in the USA :)

To me, as long as the hard drives keep working, I won’t add a SCSI solid-state drive. The more original, the better. I use BlueSCSI or ZuluSCSI only for Macs whose hard drives no longer work. The spinning sound of a hard drive is a pleasant reminder of the good old times.

@Unknown_K , a video card had been added, as well as a 10Base-T network card. I'd love a cache, but as others mentioned they are pretty expensive and I've not found any reloaded projects.

... and both are perfectly working, still, for preservation reasons, I'll recap the LBs and ABs.

two new babies: LC475 + 7200/75 The 475 seems to be pristine!

I bought a Mac IIci with a surprisingly still-working Quantum 230 MB hard drive, and immediately made an image since it had MS Excel and MS Word installed. I recapped the logic board except for the axial capacitors. The PSU works fine and shows no bad capacitors, so I’m leaving it untouched...

thanks, can u please tell which resistors exactly? I have the same issue with a classic

@MBehr thanks — it took a couple of years of practice :) I believe my issue is more on the hardware side, but I'll check on the other side @cheesestraws mate, I checked the specs and found that pin 15 is the RESET OUT from the EGRET. I added a push button at S1 on the logic board (which...

Hi everyone, I have an LC II, apparently in good shape — no battery damage, it was stored in a warm, dry place, and there’s no visible corrosion. The absence of the J9 IC seems to be normal in these boards. Pin 117 of the CPU is bent, but there is continuity. However, the capacitors near the...