Search results

🤫

Teaser.... 🤫

Nah, kudos go to @croissantking. :) I'm just following in his footsteps.

Watch from 39:11 (39 minutes and 11 seconds into the video). He specifically mentions what you can do if you have stretched out the heads so that they are no longer against the media. Fairly common mistake that's made while attempting to clean the heads.

Ah, didn’t even consider that it would issues parsing beyond the relevant chunk at the beginning. Thanks!

I just got the same card (as @unity) from @techstep yesterday. Unfortunately I currently don't have a means to test it since my only SE/30 has @zigzagjoe 's LCD kit in (ie. the CRT tube and everything, analog board, etc are all removed and packed away somewhere) and the video card for the LCD...

I still don‘t get it. Why not just upload your findings to Macintosh Garden, like everyone else?

Portrait Display, fully recapped and working great. The lower left corner geometry needs a little work but I'm going to leave it for now as it's not that bad and it's really difficult to reach the magnet for the lower corner while the display is operational. Dark spot is just the refresh.

TPU as a material seems like it should work. I have been testing a 3D printed blade to see if it will clean the drum without scratching it. That's been mostly successful. But the tests have been manually placing the blade (tpu and metal part) on the drum and rotating the drum by hand. I have...

Definitely don't take it apart. This is tremendously helpful, thanks!!

Thanks!! Does the metal holder insert into the silicone part? Is that how the two pieces are coupled, or is it glued on top, or on bottom, or both sides (ie. the silicone sandwiches around the metal part)?

If you do have a picture of the wiper with the silicone piece, both from top down angle as well as side profile angle, that would be helpful. And if have access to some calipers, if I can get a size measurement on length, width, and thickness, down to 0.5mm accuracy that would be great. Oh...

3D printed a TPU blade. Held on using aluminum tape on one side. I installed it and manually rotated the drum to see what would happen. First the positives: it's not marring or scratching the drum in any way, the TPU is soft, flexible, and rubbery in feel. Very much like silicone. And given...

Well, opened up the NOS toner cartridge to take some measurements on the silicone wiper blade. But there's nothing left of the blade... :( All the orange particles above are what remains of the wiper blade. It had basically disintegrated... not sure why it's orange in color. This was a...

Glad you figured it out!

Finished cosmetics on my Laserwriter IIf. Refinished exterior to Satin Stone Gray like my other Macs. Internally it's been completely recapped, has a new main rubber roller and separation pad. Also got a donor fuser from a parts Laserwriter IInt. The print out is ok... still a little dirty...