Search results

If you look at the different backgounds in the control panel there is one that is all squares if you set it you can easily adjust the screen until all the squares look correct and the screen size is as mentioned above

You can hang the floppy out the back of the chassis to test it, its upside down but will still work

Well done

Well done. Having a lot of possible items to purchase is definately a luxury that we don't have in Tasmania. The external drive is cool

Looking at your board I think it suits a reloaded. You have the possibility of spending a lot of time testing and track repairing compared to a parts swap. Mind you you may be lucky and its easy to fix but!

Some folks have all the luck!

I like that

I'd source another keyboard rather than trying to fix yours. Not hard to find on fleabay. I'd then concentrate on making sure everything is working correctly by using System 7.01. When you have proved your SE is OK then have a play with higher systems. System 6.0.8 was written in assembly...

Going very well. Maybe try reseating the ROM and RAM chips on the board. Can you type when booted into 6.08 or 7. Create and new folder and try to rename it. Forgot its an SE not SE/30 you only have 4mb of memory to play with, look at memory being used in Basilisk!

Try system 7.01 or 6.08 first. https://infinitemac.org/ really easy to make your images. Don't need battery. Should be able to score a new apple logo easily, they just push out of the case via the little hole

The 4 gears I referred to on Ebay are the correct ones for your drive. Also never has a logo bleach using the paint on peroxide method

Upadte - working. Faulty components Q1,Q2 & Q4.

Check Ebay for the gears. The person who made them first? sells 4 for $4 much more sensible price. Just received mine took about 4 weeks to come to Tasmania from the US. This is it https://www.ebay.com.au/itm/235320197466

Yes checked all soldering. Have moved on a bit I cleaned all the CRT contacts and have managed to get a single bright horizontal line now. Yoke connector is OK looking at the Q2 Q4 and Q5 area.

Have a 512k/plus AB. It's been recapped and cr20 replaced and no longer fup fup fup. Plus DB chimes but screen is dead. Screen does work on another supply and the HT is alive (spark test). I've reflowed the connectors and have tested 11.5v on the CRT electron gun but it does not show any...

Like it!

Thanks for the replies everyone, unfortunately I'd covered pretty much all the bases and I'm still not sure what is causing it. Put aside for another day!

Great Computer the LC475 I use mine regularly. Tants work fine and a v1 bluescsi works great unless you want the wireless networking option instead of ethernet. Enjoy

The Assante maccon software can be found on Macintosh garden

Yes thanks it is the correct cable