Recent content by transcorpmla

Thanks again. I tried unique IP addresses for each machine to no avail. Footnote - I can network (via ethernet) my PPC7600 to my iMac and my iMac to my G3 but I can't seem to network the G3 to the PPC7600. I may install the router between them to see if that will work.

Thanks again. I tried unique IP addresses for each machine to no avail. Footnote - I can network (via ethernet) my PPC7600 to my iMac and my iMac to my G3 but I can't seem to network the G3 to the PPC7600. I may install the router between them to see if that will work.

Assigning each a static address makes sense to me. Is that as simple as manually assigning the addresses in TCP/IP or do I need to connect a router in between them and do so through admin?

Thanks. I have Appletalk on and set to ethernet on both the PPC7600 and the G3. Still can't get them to connect using the chooser.

I have two older Macs (PPC7600 and G3 B&W) that I want to network. The PPC7600 is running OS 7.5 and the G3 is running OS 8.6 I have both HD's named and set for sharing. I have the two machines connected with a crossover cable via ethernet and Appletalk/TCPIP set for ethernet. Both machines...

Thanks. I downloaded Apple's 5.3.1 driver and it mounts the 300e on the SE just fine. Footnote - I tried CD Sunrise v2.2 and Power CD drivers to no avail. Seems the 300e prefers the Apple brand driver in this case.

The screws on the internal HD cover are stripped so i can't access the dip switches. Do you think setting the external to slave will make both drives mount on the desktop? Thanks.

Thank you Tom. I'll give it a try. I have one additional question about the HD on my SE... The 1987 SE 800k has an internal 120MB HD with SCSI set to ID=0. I have an external 120MB HD connected through the SCSI port, also has a SCSI ID=0. I don't know how to change the ID for the external as...

I'm trying to get my Apple 300e external CDROM player to work with my SE running OS 6.0.8 I know the 300e works with OS 7 but the specs tell me it will go back to 6.0.7 with the proper driver. Can anyone help me locate a driver or should I try to find a copy of FWB's CDROM Toolkit?

Yes, it's connected. I may just reformat it.

I have a question about my Maxtor 7120SR (external) HD... This 120MB drive has been working perfectly in an external case using an external terminator. I usually keep the SCSI ID set to 5 because I use it for installations back and forth with three other computers. I changed the SCSI ID to 0...

Could I use the ROM chips from the Centris 650?

I have a 1987 model SE with one 800k internal drive and a 120 MB internal hard drive. I would like to switch the 800k floppy drive out with a 1.44 floppy drive that I pulled from a working Centris 650. Is this siomply a matter of switching them out or do I need to do something else?

I have a Centris 650 with the internal modem that was installed at the factory. I would like to move the modem to a G3 Blue/White tower. Is the modem compatible with the G3?

Thanks - where would i look for the TE pins on the Maxtor?